1. Catalogs
  2. 3M
  3. 3M™Platinum® Plus Putty 03003, 33010, 33003w
video corpo

3M™Platinum® Plus Putty 03003, 33010, 33003w

3M™Platinum® Plus Putty 03003, 33010, 33003w
1 / 28 PagesView full catalog

3M™Platinum® Plus Putty 03003, 33010, 33003w

Product catalog summary
Product Identification: The document discusses 3M™ Platinum® Plus Putty, used for automotive body repairs, identified by product numbers 03003, 33010, and 33003.
Manufacturer Details: Manufactured by 3M, Automotive Aftermarket Division, located in St. Paul, MN, USA. Contact: 1-888-3M HELPS.
Hazard Identification: Classified as a flammable liquid (Category 3), it poses risks of eye irritation, skin sensitization, and potential carcinogenicity. Prolonged exposure may damage organs like the liver.
Precautionary Measures: Keep away from heat and flames, use non-sparking tools, ensure ventilation, and wear protective gloves and eye/face protection.
First Aid Measures: For inhalation, move to fresh air. For skin contact, wash with soap and water. For eye contact, rinse with water for 15 minutes. If swallowed, rinse mouth and seek medical attention if unwell.
Fire-Fighting Measures: Use dry chemical or carbon dioxide extinguishers. Firefighters should wear full protective gear.
Accidental Release Measures: Evacuate and ventilate the area. Use non-sparking tools for cleanup and dispose of materials according to regulations.
Handling and Storage: Store in a well-ventilated place, away from heat and incompatible materials. Keep containers tightly closed.
Exposure Controls/Personal Protection: Follow occupational exposure limits for components like silica and titanium dioxide. Use personal protective equipment to minimize exposure.
Specifications: Lists permissible exposure limits for substances like magnesium carbonate and styrene monomer, following OSHA and ACGIH guidelines.
Procedures: Use engineering controls like ventilation to maintain exposure below limits. Employ PPE such as goggles, gloves, and respirators.
Physical and Chemical Properties: The putty is a light green liquid with a pungent styrene odor, boiling point of 145 ºC, and flash point of 88 ºF.
Stability and Reactivity: Stable under normal conditions but may react with strong oxidizing agents. Hazardous polymerization can occur above 150ºF.
Toxicological Information: May cause respiratory, skin, and eye irritation. Prolonged exposure affects the liver and central nervous system. Some components are potential carcinogens.
Recommendations: Use PPE and engineering controls to minimize exposure. Avoid high temperatures and incompatible materials.
Summary of Safety Data Sheet: Identifies the product as an Organic Peroxide Type E, with key ingredients like Benzoyl Peroxide and Benzoic Acid. Provides toxicological data and disposal considerations.
Trade Secret Information: Contains trade secret information on chemical composition, with concentrations withheld.
Section 4: First Aid Measures
  • Inhalation: Move to fresh air and seek medical attention if unwell.
  • Skin Contact: Wash with soap and water, remove contaminated clothing, and seek medical attention if symptoms develop.
  • Eye Contact: Flush with water, remove contact lenses if possible, and seek medical attention.
  • If Swallowed: Rinse mouth and seek medical attention if unwell.
Section 5: Fire-Fighting Measures
  • Extinguishing Media: Use water or foam for ordinary combustible materials.
  • Special Hazards: Closed containers may explode under heat.
  • Protective Actions: Firefighters should wear full protective gear including breathing apparatus.
Section 6: Accidental Release Measures
  • Personal Precautions: Evacuate area, eliminate ignition sources, and ventilate the area.
  • Environmental Precautions: Avoid release to the environment and prevent entry into water systems.
  • Containment and Cleanup: Use absorbent materials and non-sparking tools for cleanup, and dispose of waste according to regulations.
Section 7: Handling and Storage
  • Handling: Avoid confined areas, heat sources, and ensure proper ventilation. Avoid contact with skin and eyes.
  • Storage: Store in a cool, dry place away from heat and incompatible materials.
Section 8: Exposure Controls/Personal Protection
  • Control Parameters: Lists occupational exposure limits for various substances.
  • Engineering Controls: Ensure adequate ventilation to maintain dust concentration below explosive levels.
  • Personal Protective Equipment: Use appropriate eye, skin, and respiratory protection based on exposure assessment.
Section 9: Physical and Chemical Properties
  • Appearance: Solid, red, viscous.
  • Odor: Slight ester.
  • Flash Point: 111 ºC.
  • Density: 1.2 g/cm3.
Section 10: Stability and Reactivity
  • Reactivity: May react with certain agents under specific conditions.
  • Chemical Stability: Stable unless exposed to heat or flames.
  • Incompatible Materials: Accelerators.
Section 11: Toxicological Information
  • Health Effects: May cause respiratory tract irritation, skin irritation, and severe eye irritation.
  • Acute Toxicity: Provides LD50 values for various substances.
  • Carcinogenicity: Some substances have positive data but are not classified as carcinogenic.
Reproductive and Developmental Effects: Provides data on Benzoyl Peroxide and Oxirane, Polymer with Methyloxirane, Monobutyl Ether, with NOAEL values for reproductive effects.
Specific Target Organ Toxicity: Details effects on various systems for single and repeated exposure.
Ecological and Chemical Fate Information: Contact the manufacturer for detailed information.
Disposal Considerations: Dispose of waste in accordance with regulations, preferably through incineration.
Transport Information: Refer to provided contact details for transport information.
Regulatory Information: Complies with US Federal Regulations, including EPCRA and TSCA.
Other Information: Includes NFPA and HMIS hazard classifications, emphasizing user evaluation for product suitability.
See more

Catalog excerpts

3M™Platinum® Plus Putty 03003, 33010, 33003w-1

Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. 25-9171-7 04/17/15 Document Group: Issue Date: Version Number: Supercedes Date: Product identifier 3M™ Platinum® Plus Putty 03003, 33010, 33003 ID Number(s): 60-4550-5274-0, 60-4550-5275-7 Recommended use Automotive, Filler for automotive body car repairs Supplier's details MANUFACTURER: DIVISION: ADDRESS: Telephone: 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included. Please do not separate the component documents from this cover page. The document numbers for components of this product are: 29-5993-0, 28-9013-5 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M

 Open the catalog to page 1
3M™Platinum® Plus Putty 03003, 33010, 33003w-3

Safety Data Sheet Copyright,2021, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Issue Date: Version Number: Supercedes Date: SECTION 1: Identification 1.1. Product identifier 3M™ Platinum® Plus Putty 03003, 33010, 33003 Product Identification...

 Open the catalog to page 3
3M™Platinum® Plus Putty 03003, 33010, 33003w-4

Symbols Flame | Exclamation mark | Hazard Statements Flammable liquid and vapor. Causes serious eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Causes damage to organs: liver | sensory organs | Causes damage to organs through prolonged or repeated exposure: respiratory system | sensory organs | May cause damage to organs through prolonged or repeated exposure: immune system | liver | Precautionary Statements General: Keep out of reach of children. Prevention: Obtain special instructions before...

 Open the catalog to page 4
3M™Platinum® Plus Putty 03003, 33010, 33003w-5

Continue rinsing. If eye irritation persists: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. IF exposed or concerned: Get medical advice/attention. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. Storage: Store in a well-ventilated place. Keep cool. Store locked up. Keep container tightly closed. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 19% of the...

 Open the catalog to page 5
3M™Platinum® Plus Putty 03003, 33010, 33003w-6

If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Irritating to the respiratory tract (coughing, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain). Allergic skin reaction (redness, swelling, blistering, and itching). Central nervous system depression (headache, dizziness, drowsiness, incoordination, nausea, slurred speech, giddiness, and unconsciousness). Target organ effects. See Section 11 for additional details. Target organ effects following prolonged or repeated exposure. See Section...

 Open the catalog to page 6
3M™Platinum® Plus Putty 03003, 33010, 33003w-7

static discharge. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. Use personal protective equipment (gloves, respirators, etc.) as required. To minimize the risk of ignition, determine applicable electrical classifications...

 Open the catalog to page 7
3M™Platinum® Plus Putty 03003, 33010, 33003w-8

Inert Filler Inert Filler Inert Filler Styrene Monomer Styrene Monomer Trade Secret Trade Secret Trade Secret Trade Secret Trade Secret ACGIH ACGIH A3: Confirmed animal carcin. A4: Not class. as human carcin A4: Not class. as human carcin A3: Confirmed animal carcin., Ototoxicant ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL:...

 Open the catalog to page 8

Archived catalogs

  1. Elite Series

    8  Pages

  2. Flexible Foam

    4  Pages

  3. Sharpshooter?

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.