Catalogs >
3M >
3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS

3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS
4Pages

Catalog excerpts

3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS - 1

Platinum™ 01171 • 01231 • 01271 • 31138 Technical Data Sheet 3M™ Platinum™ Lightweight Body Filler - One gallon can - 102 fl oz, 3.0 L, 0.80 US gal 3M™ Platinum™ Lightweight Body Filler - Three gallon mechanical dispenser pail 2.2 gallons, 8.3L, 282 fl oz. 3M™ Platinum™ Lightweight Body Filler - Three gallon air dispenser cartridge - 2.2 gallons, 8.3L, 282 fl oz. 3M™ Platinum™ Lightweight Body Filler - Five gallon air dispenser pail - 3.75 gallons, 14.2L Product Description 3M™ Platinum™ is a premium, professional lightweight body filler, that offers excellent surface adhesion to properly prepared steel, galvanized steel, aluminum, E-coat, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP), concrete and wood substrates. 3M™ Platinum™ is formulated with Stain-free/Tack free resin and is compatible with most base coat/clear coat and waterborne paint systems. Features Adhesion Promoted Formulation Tack Free / Stain Free Resin Vacuum Processed to minimize pinholes Creamy formula provides easy mixing & spreading Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Part A - Filler Container Base Density Color Flash Point Viscosity @ 77°F (25°C) Brookfield Viscometer Part B - Cream Hardener PN 01171 - One gallon metal can PN 01231 - Three gallon mechanical dispenser metal pail PN 01271 - Three gallon air dispenser fiber cartridge PN 31138 - Five gallon air dispenser metal pail Polyester resin with styrene monomer Benzoyl Peroxide

Open the catalog to page 1

3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS - 2

For professional use only. Not intended for retail sale. Two component polyester compound used to fill dents, dings, gouges and other cosmetic imperfections on bare steel, galvanized steel, aluminum, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP). May also be used on many industrial and architectural surfaces needing minor repairs. Typical Performance Properties The following times have been determined with ambient air temperature and substrate temperature @ 77°F (25°C) and are considered typical values. SHAPE SAND TIME: 8 to 12 minutes when mixed with 2% hardener by...

Open the catalog to page 2

3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS - 3

1. Wash surface with soap and water to remove water soluble contaminants. Follow the soap and water wash with an appropriate VOC compliant product for removal of surface contaminants. Sand the surface as needed with grade P40 to P80 3M™ abrasive. Note: If grinding is required use a grade 50 3M™ grinding disc, blow off the sanding dust with clean dry air. When repairing galvanized steel, e-coat, primed/ painted surfaces or aluminum, sand with grade P80 3M™ abrasive to remove the paint/primer. Blow off with clean dry compressed air and re-clean the surface using a VOC compliant product for...

Open the catalog to page 3

3M™ Platinum™ Filler - 01121, 01171, 01231, 01271, 31311 TDS - 4

Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC’s) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area. Safety Considerations Material Safety Data Sheets (MSDS) are available from 3M™ at www.3M.com/MSDS or upon request through your nearest Sales office. MSDS sheets are provided to help customers...

Open the catalog to page 4