Safety Data Sheet Copyright,2019,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Issue Date: Version Number: Supercedes Date: SECTION 1: Identification 1.1. Product identifier 3M™ Perfect-It™ Paste Wax PN 39526, 38526, 39526S, 33526 Product Identification Numbers 60-4550-3090-2, 60-9800-4373-5, 60-9801-0783-7 7000000460 1.2. Recommended use and restrictions on use Recommended use Automotive, Wax for Automotive paint 1.3. Supplier’s details MANUFACTURER: DIVISION: ADDRESS: Telephone: 3M Automotive Aftermarket 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Flammable Solid: Category 1. Specific Target Organ Toxicity (single exposure): Category 3. 2.2. Label elements Signal word Danger Symbols Flame | Exclamation mark | __________________________________________________________________________________________ Page

Hazard Statements Flammable solid. May cause drowsiness or dizziness. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you...

Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. medical attention. Remove contact lenses if easy to do. Continue rinsing. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting...

accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. To minimize the risk of ignition,...

An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties...

10.5. Incompatible materials Strong oxidizing agents 10.6. Hazardous decomposition products Substance None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for...

Overall product No data available; calculated ATE >5,000 mg/kg HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11C13) InhalationVapor (4 hours) Dermal Dermal Ingestion Hydrotreated Light Petroleum Distillates Carnauba Wax InhalationDust/Mist (4 hours) Ingestion Dermal LD50 > 5,000 mg/kg LD50 estimated to be > 5,000 mg/kg Carnauba Wax Siloxanes And Silicones, Di-Me Siloxanes And Silicones, Di-Me Montan Wax Ingestion Dermal Ingestion Dermal LD50 > 8,800 mg/kg LD50 > 19,400 mg/kg LD50 > 17,000 mg/kg LD50 estimated to be > 5,000 mg/kg HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11-C13) Hydrotreated Light Petroleum...

Name HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11C13) Hydrotreated Light Petroleum Distillates Route Not Specified Dermal Species Not available Mouse Value Not carcinogenic Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Name Test Result Exposure Duration premating & during gestation 28 days HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11-C13) Not classified for female reproduction HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11-C13) HYDROTREATED HEAVY NAPHTHA (PETROLEUM) (C11-C13) Not classified for male reproduction...

Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified...