Product Description A mildew resistant, non-sagging, moisture curing silicone rubber sealant for above the waterline applications which remains exible with excellent resistance to the marine environment. Adheres to bare and painted metal, glass, berglass, non-oily woods and many plastics and abraded rubber. Product Features • Mildew resistant • One component cure • Flexible polymer • Excellent weathering resistance • Non-shrinking • High temperature resistant • Non-sagging

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for speci cation purposes. Typical Uncured Physical Properties Property White, Clear Colors may vary from nearly white to yellow/amber. Adhesive performance is not a ected by color variation. Caulkable, non-sag paste Typical Mixed Physical Properties Property Test Condition Tack Free Time Room Temperature Room Temperature Typical Performance Characteristics Property Tensile Strength Service...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Typical Performance Characteristics (continued) Overlap Shear Strength 4.2 kg/cm² Substrate Notes Failure mode Notes One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness) Cohesive – Adhesive/Sealant fails before adhesive/sealant releases from substrate. This is the desired mode. Adhesive Failure – Adhesive/Sealant releases from substrate. Desirable failure mode is cohesive. One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness) Cohesive – Adhesive/Sealant fails before adhesive/sealant releases...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Typical Performance Characteristics (continued) Overlap Shear Strength 4.2 kg/cm² Stainless Steel Substrate Notes Failure mode Test Condition One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness) Cohesive – Adhesive/Sealant fails before adhesive/sealant releases from substrate. This is the desired mode. Adhesive Failure – Adhesive/Sealant releases from substrate. Desirable failure mode is cohesive. One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness) Cohesive – Adhesive/Sealant fails before adhesive/sealant...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Typical Performance Characteristics (continued) Overlap Shear Strength 4.2 kg/cm² Substrate Glass Substrate Notes Failure mode Cohesive Test Condition Notes One inch (2.54 cm) overlap specimens (0.093 inch [0.2362 cm] thickness); Resins used in ber reinforced plastics often vary. To ensure strong bond, adhesion tests should always be performed on the speci c substrates used in application. Cohesive – Adhesive/Sealant fails before adhesive/sealant releases from substrate. This is the desired mode. Adhesive Failure – Adhesive/Sealant...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Typical Performance Characteristics (continued) 180° Peel Adhesion 16 oz/in Environmental Condition Fiber-Reinforced Plastic One inch (2.54 cm) wide specimens on canvas. Resins used in ber reinforced plastics often vary. To ensure strong bond, adhesion tests should always be performed on the speci c FRP used in application. Cohesive – Adhesive/Sealant fails before adhesive/sealant releases from substrate. This is the desired mode. Adhesive Failure – Adhesive/Sealant releases from substrate. Property: 180° Peel Adhesion Failure mode:...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Handling/Application Information Directions for Use Surface Preparation: There are waxes, coatings, sealers, greases, oils and other contaminants used in the marine industry, making it very important to clean all surfaces before applying 3MTM Marine Grade Silicone Sealant. Recommended procedures include cleaning with 3MTM General Purpose Adhesive Cleaner* 08984. Abrading the surface with 180- to 200-grit abrasive before cleaning will enhance the bond strength. Cut the plastic nozzle tip to the desired bead size. Puncture the seal...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 References Property Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/? gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=Marine Grade Silicone Sealant ISO Statement This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Precautionary Information Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1800-364-3577 or (651)...

3M™ Marine Grade Silicone Sealant: 08017 • 08027 • 08019 • 08029 Information Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills su cient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property...