*mynauticexpo

Catalogs
3M
3M™ Lightweight Body Filler TDS_05800, 05801, 05804

3M™ Lightweight Body Filler TDS_05800, 05801, 05804

Product catalog summary

Product Overview
3M™ Lightweight Body Filler is a two-component material designed for professional use to fill cosmetic imperfections on various surfaces such as steel, aluminum, and fiberglass reinforced polyester. It is available in different sizes: one quart, one gallon, and five gallons.

Features

Easy spreading and mixing
Tack-free resin
Vacuum processed for smooth texture

Physical Properties

Base: Polyester resin with styrene monomer
Density: 9.2 lb/gal for filler, 10.0 lb/gal for hardener
Color: Gray for filler, Blue for hardener
Flash Point: 89°F / 32°C
Viscosity: 192,000 - 244,000 cps for filler, 70,000 - 150,000 cps for hardener

Performance Properties

Shape Sand Time: 8 to 12 minutes at 77°F (25°C)
Finish Sand Time: 20 minutes at 77°F (25°C)
Recommended Application Temperature: Above 45°F (7°C)
Service Temperature: -20°F to 180°F (-29°C to 82°C)
Lap Shear Strength: 1,430 psi for steel, 1,320 psi for aluminum
Tensile Strength: 1,600 psi
Shore D Hardness: 70
Flexural Strength: 2,260 psi
Shrinkage: 0.72%

Directions for Use

Clean the surface with soap and water, followed by a VOC compliant cleaner.
Sand the surface with appropriate abrasives.
Mix filler and hardener thoroughly to a uniform color.
Apply a thin layer with firm pressure, building up as needed.
Sand to contour using recommended abrasive sequence.
Wait 45 minutes before applying primer and paint.

Storage and Handling

Store in a dry area at 65-80°F (18-27°C).
Shelf life of 16 months from the date of manufacture.
Avoid dust inhalation and eye contact.

Precautionary Information
Consult the Product Label and Safety Data Sheet for health and safety information. Be aware of local regulations regarding VOCs.

Warranty and Liability
3M warrants that the product meets specifications at the time of shipment. No other warranties are implied. Liability is limited to product replacement or refund.

Catalog excerpts

3M™ Lightweight Body Filler TDS_05800, 05801, 05804-1

Lightweight Body Filler 05800 • 05801 • 05804 Technical Data Sheet 3M™ Lightweight Body Filler - One quart - 25.6 fl oz, 757ml 3M™ Lightweight Body Filler - One gallon - 102 fl oz, 3.0L, 0.80 US gal. 3M™ Lightweight Body Filler - Five gallon air dispensed - 3.75 gallons, 14.2L Product Description 3M™ Light weight body filler is a two component material that is vacuum processed to create a smooth texture. 3M™ Lightweight body filler cures tack free in 20 minutes with good sanding and handling characteristics. • Easy spreading & mixing • Tack free resin • Vacuum processed Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Part A - Filler Container Part B - Cream Hardener 1.0 oz. plastic tube 2.75 oz. plastic tube PN 05801 - One gallon metal can PN 05804 - Five gallon metal can (Air Pail) Base Density Color Flash Point Viscosity @ 77°F (25°C) Brookfield Viscometer Polyester resin with styrene monomer Benzoyl Peroxide

Open the catalog to page 1

3M™ Lightweight Body Filler TDS_05800, 05801, 05804-2

3M™ Lightweight Body Filler 05800 • 05801 • 05804 Product Uses For professional use only. Not intended for retail sale. Two component polyester compound used to fill dents, dings, gouges and other cosmetic imperfections on bare steel, aluminum, and fiberglass reinforced polyester (FRP). May also be used on many industrial and architectural surfaces needing minor repairs. Typical Performance Properties The following times have been determined with ambient air temperature and substrate temperature @ 77°F (25°C) and are considered typical values. SHAPE SAND TIME: 8 to 12 minutes when mixed with...

Open the catalog to page 2

3M™ Lightweight Body Filler TDS_05800, 05801, 05804-3

3M™ Lightweight Body Filler 05800 • 05801 • 05804 Directions for Use 1. Wash surface with soap and water to remove water soluble contaminants. Follow the soap and water wash with an appropriate VOC compliant product for removal of surface contaminants. Sand the surface as needed with grade P40 to P80 3M™ abrasive. Note: If grinding is required use a grade 50 3M™ grinding disc, blow off the sanding dust with clean dry air. When repairing galvanized steel, e-coat, primed/ painted surfaces or aluminum, sand with grade P80 3M™ abrasive to remove the paint/primer. Blow off with clean dry compressed...

Open the catalog to page 3

3M™ Lightweight Body Filler TDS_05800, 05801, 05804-4

3M™ Lightweight Body Filler 05800 • 05801 • 05804 Precautionary Information Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC’s) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area Technical Information The technical information, recommendations and other statements contained in this document are based upon...

Open the catalog to page 4

All 3M catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list