1. Catalogs
  2. 3M
  3. 3M™ Clear Auto Sealer
video corpo

3M™ Clear Auto Sealer

3M™ Clear Auto Sealer
1 / 13 PagesView full catalog

3M™ Clear Auto Sealer

Product catalog summary
Product Identification
3M™ Clear Auto Sealer, P.N. 08551, is an automotive sealer produced by 3M's Automotive Aftermarket division in St. Paul, MN, USA.
Hazard Identification
This product is a flammable liquid (Category 2) and can cause eye and skin irritation, allergic reactions, reproductive toxicity, drowsiness, dizziness, and organ damage with prolonged exposure.
Precautionary Measures
Keep away from heat and flames, use non-sparking tools, and ensure proper ventilation. Wear protective gloves and eye/face protection. Follow specific first aid measures for exposure.
Composition
Contains Poly(Butyl Methacrylate), Hydrotreated Light Naphtha, Toluene, N-Butyl Methacrylate, and Benzene, with some trade secret components.
First Aid Measures
Move to fresh air for inhalation issues, wash skin with soap and water, flush eyes with water, and rinse mouth if ingested.
Fire-Fighting Measures
Use dry chemical or carbon dioxide extinguishers. Be aware of container explosion risks under heat.
Accidental Release Measures
Evacuate area, avoid environmental release, use non-sparking tools, contain spills with absorbent materials, and dispose of properly.
Handling and Storage
Store in a cool, ventilated area away from heat and oxidizing agents. Use personal protective equipment and avoid static discharge.
Exposure Controls/Personal Protection
Use engineering controls and personal protective equipment like goggles, gloves, and respirators to minimize exposure.
Physical and Chemical Properties
Clear liquid with naphtha odor, boiling point of 232 ºF, flash point of 42 ºF, and not water-soluble.
Stability and Reactivity
Stable under normal conditions but avoid sparks, flames, and strong oxidizing agents.
Toxicological Information
May cause respiratory and skin irritation, allergic reactions, and more severe health effects with long-term exposure.
Health Hazards
Skin contact may cause irritation and blistering; eye contact can lead to moderate irritation. Ingestion may cause gastrointestinal issues. Prolonged exposure can affect the central nervous system and cause reproductive harm.
Carcinogenicity
Benzene is classified as carcinogenic to humans by IARC and recognized as a human carcinogen by NTP and OSHA.
Toxicological Data
Low acute toxicity via inhalation and ingestion. Components like Toluene and N-Butyl Methacrylate show varying irritation and sensitization potential.
Ecological Information
Contact 3M for detailed ecotoxicological and chemical fate information.
Disposal Considerations
Dispose of in compliance with regulations. Incineration is recommended for uncured products, and containers should be treated as hazardous waste.
Regulatory Information
Subject to US Federal and State regulations, including California Proposition 65. Components comply with TSCA requirements.
Other Information
Includes NFPA hazard classifications and a disclaimer on information accuracy. Users should evaluate product suitability for specific applications.
See more

Catalog excerpts

3M™ Clear Auto Sealer-1

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: Issue Date: Version Number: Supercedes Date: SECTION 1: Identification 1.1. Product identifier 3M™ Clear Auto Sealer, P.N. 08551 Product Identification Numbers LB-K100-0312-2, 41-0003-6717-1, 41-3701-2182-8, 60-4550-3007-6, 60-4550-5500-8, 60-9800-2710-0, 60-9800-3752-1, 62-5555-2609-4, CS-0406-7033-6 1.2. Recommended use and restrictions on use Recommended use Automotive, Automotive Sealer 1.3. Supplier’s details MANUFACTURER: DIVISION: ADDRESS: Telephone: 3M Automotive Aftermarket 3M Center, St. Paul, MN 55144-1000, USA 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Flammable Liquid: Category 2. Serious Eye Damage/Irritation: Category 2B. Skin Corrosion/Irritation: Category 2. Skin Sensitizer: Category 1. Reproductive Toxicity: Category 1B. Specific Target Organ Toxicity (central nervous system): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger

 Open the catalog to page 1
3M™ Clear Auto Sealer-2

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 Symbols Flame | Exclamation mark | Health Hazard | Pictograms Hazard Statements Highly flammable liquid and vapor. Causes eye irritation. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure: nervous system | sensory organs | Precautionary Statements General: Keep out of reach of children. Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood....

 Open the catalog to page 2
3M™ Clear Auto Sealer-3

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 Storage: Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Hazards not otherwise classified None. 45% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: Composition/information on ingredients Ingredient Poly(Butyl Methacrylate) Hydrotreated Light Naphtha (Petroleum) Toluene N-Butyl Methacrylate Benzene % by Wt 30 - 60 Trade Secret * 30 - 60 Trade Secret...

 Open the catalog to page 3
3M™ Clear Auto Sealer-4

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode. Hazardous Decomposition or By-Products Substance Carbon monoxide Carbon dioxide Condition During Combustion During Combustion 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency...

 Open the catalog to page 4
3M™ Clear Auto Sealer-5

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Toluene 108-88-3 OSHA TWA:200 ppm;CEIL:300 ppm Toluene 108-88-3 ACGIH TWA:20 ppm A4: Not class. as human carcin Toluene 108-88-3 CMRG STEL:75 ppm Skin Notation Hydrotreated Light Naphtha 64742-49-0 CMRG TWA:50 ppm (Petroleum) Benzene 71-43-2 OSHA TWA:1 ppm;TWA:10 29 CFR 1910.1028 ppm;STEL:5 ppm;CEIL:25...

 Open the catalog to page 5
3M™ Clear Auto Sealer-6

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Liquid General Physical Form: clear, odor of naphtha Odor, Color, Grade: Not Applicable pH No Data Available Melting point 232 ºF Boiling Point 42 ºF Flash Point >=2 [Ref Std: ETHER=1] Evaporation rate Not Applicable...

 Open the catalog to page 6
3M™ Clear Auto Sealer-7

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data...

 Open the catalog to page 7
3M™ Clear Auto Sealer-8

3M™ Clear Auto Sealer, P.N. 08551 03/25/15 Carcinogenicity: Ingredient Benzene Benzene Benzene Class Description Grp. 1: Carcinogenic to humans Known human carcinogen Cancer hazard Regulation International Agency for Research on Cancer National Toxicology Program Carcinogens OSHA Carcinogens Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Overall product Overall product Poly(Butyl Methacrylate) Hydrotreated Light Naphtha (Petroleum)...

 Open the catalog to page 8

Archived catalogs

  1. Elite Series

    8  Pages

  2. Flexible Foam

    4  Pages

  3. Sharpshooter?

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.