カタログ >
Xylem >
Par-Max Series

Par-Max Series
1 / 2ページ

カタログの抜粋

NEW! Par-Max Series 7.0 GPM WATER PRESSURE PUMP Service up to seven outlets with smooth flow and hassle-free operation. The high pressure capability of the new Par-Max Series 7.0 GPM water pressure pump provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets at one time. When onboard appliances are activated, the built in bypass design re-circulates back pressure into the pump to reduce cycling resulting in a quieter and smoother flow. The Par-Max 7.0 GPM Water Pressure Pump includes a PumpgardTM strainer, soft rubber mounts and quick connect fittings for ease of installation. The pump is self priming up to 10ft. (3m) and can run dry without damage. It’s manufactured from corrosion resistant materials and is capable of pumping water up to 70°C (160°F). Available in either 12 or 24 volt DC versions, the Par-Max 7.0 GPM Water Pressure Pump is certified to EN ISO 8846 Marine (Ignition Protection). Features and Benefits • 7.0 GPM (26.5 LPM) Open Flow Rate • Up to 60 PSI (4.1 bar) • Self-Priming / Runs Dry • Silent Operation • Low Amp Draw

カタログの1ページ目を開く

PAR-MAX SERIESTM | 7.0 GPM WATER PRESSURE PUMP Specifications Pump: 5 Chamber Positive displacement diaphragm design. Self-Priming up to 10 feet suction lift. Pump able to run dry without damage. Removable port adapters. Available Pre-Pressurised Accumulator Tanks Accumulator tank will improve any pressure switch controlled water system by smoothing water flow and reducing on/off cycling of the pump. Motor: Permanent magnet, double ball bear armature. Jabsco accumulator tanks are maintenance free and can be mounted at any angle, thanks to their internal membrane. Kit Includes QUICK EASY...

カタログの2ページ目を開く