カタログ >
Xylem >
Oil Change & Diesel

Oil Change & Diesel
1 / 6ページ

カタログの抜粋

07 Oil Change & Diesel Transfer Pumps OIL CHAngE PuMPS The Porta-Quick™ Portable Oil Changer makes quick, clean and easy oil changes onboard any boat, because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump. • 14 Quart (13 litre) container easily handles two engines. • Pump is reversible to both drain and refill engine oil. • Sturdy bronze pump head. • High temperature resistant Teflon™ dip-stick probe. • non-collapsible thick wall suction hose. • garden hose thread adapter included, for dipsticks with gHT male threaded ends. • Complies with uSCg 183.410 and ISO 8846 MARInE (Ignition Protected). FITTING SIZE 155⁄ 8” high x 13½” diameter (35cm x 34cm). Hose - ½” (13mm) ID x 48” (120cm) long. Probe - ¼” (6.5mm) OD x 40” (100cm) long. 12 volt DC, fuse 15 amp Oil Changer (Non CE). 24 volt DC, fuse 8 amp Oil Changer. Replacement Nitrile Impeller.

カタログの1ページ目を開く

DIY Oil Changer The Do-it-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. • Fully assembled. • 14 Quart (13 litre) container. • Tested for 1400 cycles. • 8’ (2.49m) dipstick hose. The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. • Pump is reversible to both drain and refill engine oil. • Self-priming to 3ft (1m) of lift. • Includes ³⁄8” nPT full flow ball valve. • Reversing switch guard to avoid accidental...

カタログの2ページ目を開く

07 Oil Change & Diesel Transfer Pumps OIL CHAngE PuMPS Gear Puppies These robust pumps make oil and diesel transfer simple and easy for fixed installation systems. The Junior gear Puppy can produce 3.5 gpm (14 lpm) and the gear Puppy can produce up to 6.5 gpm (25 lpm) and handle viscosities up to 150cs. • Rugged bronze construction. • Inlet filter supplied. 23220-2012 12 volt DC, fuse 10A, Junior Gear Puppy. • Complies with uSCg 183.410 and ISO 8846 MARInE (ignition protection). • Self priming to 3ft (1m). • 15 minute duty rating. 24 volt DC, fuse 5A, Junior Gear Puppy. 12 volt DC, fuse...

カタログの3ページ目を開く

Engine Oil Drain Pump Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser. Connection for ¾” gHT male thread. • Screws onto threaded male ¾” garden hose • (gHT) fitting on top of dipstick tube. • gives simple “one-hand” pumping. Engine Oil Drain Pump. • Complete with 2ft (60cm) of ½” (13mm) ID drain hose. Handy Boy Utility Pump FITTING Connection for ½” (13mm) ID hose. Foot adaptor for ½” (13mm) ID hose. 1 each ½” (13mm) ID hoses, 1 each 5/16” (6.5mm) probe, 1 each ¼” (6mm) probe. Versatile polished brass...

カタログの4ページ目を開く

07 Oil Change & Diesel Transfer Pumps DIESEL TRAnSFER PuMPS Sliding Vane 18680 - 6 gpm Light duty, 30 minute rated diesel pump. • 6 gpm (23 lpm) at 10ft (3m) head. • 30ft (9m) maximum total head. • Self-priming up to 3ft (1m) vertical lift. • Duty cycle-30 minutes at 10ft (3m) at 86°F (30°C). • Rugged bronze pump head. • Complies with uSCg 183.410 and ISO 8846 • MARInE (Ignition Protection). For service and spare parts listing see page 209. Sliding Vane 18680 - 6 gpm Reversible Light duty, 30 minute rated diesel pump with integral reversing switch. • 20ft (6m) maximum total head. •...

カタログの5ページ目を開く

Sliding Vane 23870 Light duty, 35 minute rated diesel pump. • 20ft (6m) maximum total head. 7” long x 5½” wide x 4½” high (19cm x 11cm x 14cm). • Self-priming up to 9ft (2.8m) vertical lift. 12 volt DC model, fitted switch, fuse 20 amp. • Integral switch and fuse fitted as standard. 24 volt DC model, fitted switch, fuse 10 amp. • Accessories available. • ISO 8846 MARInE (Ignition Protection). For service and spare parts listing see page 209. Sliding Vane VR050 Continuously rated, diesel pump. 8½” long x 5” wide x 5¼” high (23cm x 13cm x 15cm). • 13.7 gpm (50 lpm) at 10ft (3m) total head. •...

カタログの6ページ目を開く