Bilge Pumping Systems
1 / 26ページ

02 Bilge Pumping Systems InTRODuCTIOn Introduction to Rule Bilge Pumps Rule Submersible Bilge Pumps have set the standard for the industry for decades. They are the first choice of yachtsmen and fishermen throughout the world. More innovations in Bilge Pump design have come from Rule Industries than any other manufacturer and we are proud to offer the broadest range of bilge pumps in the world. • Compact, efficient, long life motors. • Ability to run dry for short periods. • Easy clean snap-lock strainer bases. • Stainless steel shafts. • Completely submersible. • Marine grade blocked wiring. • Rust and corrosion protection. • Silent and vibrationless operation. • CE and ISO 8849 certification. • Ignition protection.

Fully Automated Bilge Pumps Automatic Bilge Pumps Computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2½ minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Thereafter, it will check for water every 2½ minutes. Power use in the checking mode is minimal. FEATURES AND BENEFITS • no external switch. • Pump operates automatically by sensing for water. • Pump turns on every 2½ minutes to feel for water. When water is encountered...

02 Bilge Pumping Systems InTRODuCTIOn Manual Diaphragm Pumps Jabsco Amazo n Bilge Pump Bilge strainer 29290 - serie s These are the traditional mainstay of small craft bilge pumping systems and can offer surprisingly good flow rates, as well as a variety of installation options. Yacht racing rules state that at least one pump must be capable of being pumped from the cockpit with all hatches shut. The best way to accomplish this is with a through deck kit which allows the pump to be in stalled safely below decks while the operator pumps from above. A well designed manual bilge pump is very...

Electric Flexible Impeller Pumps Flexible Impeller pumps make excellent bilge pumps, principally be cause of their ability to handle bilge debris without damage. Because of the robust design many owners still use our 12 volt DC or 24 volt DC flexible impeller motor pump units that are up to 25 years old! Flexible Impeller Pumps also give the benefits of good flow, low cost, low size and weight, and are easily serviced and maintained. Most Flexible Impeller pumps must not be run dry, as this will damage the impeller which will require replacing. However, the utility Puppy 2000 and 3000 both...

02 Bilge Pumping Systems ELECTRIC SuBMERSIBLE PuMPS The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats. The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. ¾’’ (19mm) discharge outlet. 12 volt DC unless noted. ¾” (19mm) discharge outlet. 12 volt DC. 360 gph (1363 lph) Pump with Mercury Free Rule-A-Matic® Float Switch. 750 G.P.H. (2839 L.P.H.) Rule’s 750 gph pump offers increased capacity in keeping with its...

Rule offers two 800 gph (3028 lph) styles - square and round versions. The square model (20F) offers 36 mounting variations as well as a gas resistant strainer base. ¾” (19mm) discharge outlet. 12 volts DC unless noted. The Rule 1000 is in a class by itself and is a popular choice among boat builders and boat owners alike. 36 mounting variations and a gas resistant strainer base make this one of Rule’s most popular pumps. 1¹/8” (29mm) discharge outlet. 12 volt DC. 800 gph (3028 lph) Pump wit Mercury Free Rule-A-Matic® Plus™Float Switch. 800 gph (3028 lph) Round. 800 gph (3028 lph) Round (24...

02 Bilge Pumping Systems ELECTRIC SuBMERSIBLE PuMPS The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1¹/8" (29mm) discharge outlet. 12 volt DC unless noted. Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1½” (38mm) discharge outlet. 12 volt DC unless noted. 14A 14A-6UL 3700 gph (14002 lph) -UL listed with 6’ (1.8m) wire leads. GOLD SERIES 13A 3700 gph (14002 lph) 5 Year Warranty. Designed for the toughest applications, the 4000 gPH (15137 LPH) pump optimizes Rule’s exclusive design...

PWC Automatic 500 GPH (1893 LPH) Automatically removes water from engine compartment without the use of a float switch. Cycles every 20 seconds to check for water. Compact design allows it to fit in tight spaces. Easy installation. Equipped with gasoline resistant strainer base and 72” (1.8m) wire leads. 12 volt DC. PWC Non-Auto 500 GPH (1893 LPH) Removes water from engine compartment. Compact design allows it to fit in tight spaces. Easy installation. Equipped with gasoline resistant strainer base and 72” (1.8m) wire leads. 12 volt DC. 25D-6WC ¾" (19mm) discharge outlet. PWC Pump On/Off...

02 Bilge Pumping Systems In-LInE SuBMERSIBLE PuMPS Rules family of compact combination Submersible and Inline pumps and Portable Pump kits designed for a wide variety of uses, both onboard and ashore. There are four models in the Slimline Series which include strainers for use in submersible mode or, when the filter is removed, for use in the inline pumping mode. iL500P • Pumps fresh and seawater, diesel and anti-freeze. • Wash down for cars, vehicles, anchors and decks. • Deck shower. • under engine bilge pumping. • Diesel refueling and transfer. • garden watering. • Container filling and...

02 Bilge Pumping Systems SWITCHES - BILgE PuMP COnTROL Rule-A-Matic® Float Switch Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade “blocked” wire. Designed for pumps drawing up to 14 Amps at 12 volt DC. Model 35A and 35FA now includes a 2 year warranty. Rule-A-Matic® float switch with fuse holder. Rule-A-Matic® float switch, 2¼” x 5” x 1¾” (57 x 127 x 58mm), 12-24v DC, fuse 14 amp (12v), 7...