カタログ >
Weatherdock AG >
EASY SPLIT OCB

EASY SPLIT OCB
1 / 1ページ

カタログの抜粋

Extend the use of your VHF antenna, even for Class B active VHF splitter for Class B Functionality: these units are designed to work together in a perfect way. The easySPLIT OCB (OCB stands for ..operates Class B) checks whether there is transmit power from the VHF radio or the Class B AIS transceiver to the antenna. If this is the case, the easySPLIT _ disconnects very fast the other connected units. In the standard reception mode, the units are all connected to the same antenna. A very fast disconnection is necessary, because the Class B AIS transceiver transmits its signal with 2 W power in a very short time. Therefore the used splitter, the easySPLIT OCB, must disconnect the other units even faster than the Class B AIS transceiver is transmit- ting its message. The easySPLIT OCB is disconnecting the other units in less than 1 ms! What else do I need to use the easySPLIT OCB? As the easySPLIT OCB is a splitter, you need nothing else than your already existing units (e.g. VHF antenna) and of course a power What fits to the easySPLIT OCB? All existing VHF radios, all existing AIS Class B transceivers, as well as all AIS receivers and all existing FM radios can be connected to the easySPLIT. Nevertheless the optimum performance is achieved if you use other units from the Weatherdock AG company, because ■ Active VHF splitter to connect to the standard VHF antenna: AIS transceiver Class B (Recommended for use with easyTRX) or ■ Enlarged DC power input ■ Frequency selective power divider with 2 transmit/receive ports (VHF radio and Class B AIS ) and 1 receiver port ■ Power: 9 v - 28 VDC, @ < 120 mA (Average of different modes) ■ Ambient conditions: under deck, o° C to 60° C Your local dealer:

カタログの1ページ目を開く

EASY SPLIT OCB 1 / 1ページ

カタログの抜粋

Weatherdock AGのすべてのカタログとパンフレット

EASY SPLIT OCB
1 / 1ページ