Refrigeration Appliances
1 / 42ページ

REFRIGERATION APPLIANCES SERVICE AND ORIGINAL EQUIPMENT

FOR THE LAST 36 YEARS, VULKAN LOKRING HAS DEVELOPED, MANUFACTURED AND MARKETED MECHANICAL TUBE JOINING SYSTEMS FOR REFRIGERANT LINES. VULKAN Lokring is a company that belongs to the VULKAN Group, APPROVED SOLUTION which is a medium-sized family-owned enterprise for technical industrial applications with its head ofce in Germany. As a developer of the LOKRING technology, VULKAN Lokring is a market have been successfully used in the industrial volume production leader in the eld of solder-free and non-detachable tube joints. of refrigerators, freezers and air conditioning systems. Developed...

CONTENTS VULKAN LOKRING LOKRING® STARTER KITS ASSEMBLY TOOLS LOKPREP LOKRING® TUBE CONNECTIONS STOPPERS NAV CONNECTIONS FILTER DRIERS CHARGING TUBES ACCESSORIES LOKRING® ASSEMBLY ONLINE-SERVICE IMPRINT

VULKAN LOKRING. LOKRING tube connections and tools are made by VULKAN Lokring in-house: Development, construction, manufacture as well as sales & service. For the customers, this means „all from a single source“ and directly from the manufacturer: customised planning and consultancy, supervision at the time of introduction, and support and service locally wherever required. RESEARCH AND DEVELOPMENT. VULKAN Lokring is the inventor and developer of the patented LOKRING tube joint. For the last 36 years, experienced engineers have built new solutions for customers‘ applications in the...

THE BEST CONNECTION - WORLDWIDE. Operating with five international production locations, with 16 subsidiary companies and an additional 13 agencies worldwide, we ensure that VULKAN Lokring expertise is available on site throughout the world. This means that our customers have rapid access to our specialists and that the necessary solutions are quickly available exactly where they are needed. LOKnnc Headquarters H Production Subsidiary Q Subsidiary CUSTOMER REFERENCES. A small selection from more than 6,600 satisfied customers Life's Good

E PATENTED LOKRING® TUBE CONNECTION SYSTEM PROVIDES AN INNOVATIVE SYSTEM OF SOLDER-FREE TUBE CONNECTIONS FOR EVERY REPAIR SITUATION IN REFRIGERATION APPLIANCES. LOKRING tube connections can be made without a great deal of force being necessary, using simple hand assembly tools. LOKRING ensures an absolutely clean, permanent and purely mechanical tube connection with long-term her- metic gas-tightness. This is confirmed by the special TUV test and approval. All this makes LOKRING tube connections one of the most economical and reliable methods of connecting refrigerant tubes. Also suitable...

ONE SYSTEM ENDLESS POSSIBILITIES Straight Connections Straight Reducing Connections Capillary Connections Replace a charging tube Repair leaky tubes T-connections Connections with schrader valve Stoppers

LOKRING BRASS CONNECTORS ® THE TYPICAL LOKRING union joint consists of two LOKRINGs and one tubular joint for the acceptance of the two tube ends. Thanks to the conical inner contour of the LOKRING and the special outer contour of the joint, the diameter of the connection is reduced during assembly to such an extent that the joint and the tube create a hermetically sealed metal-to-metal connection. The lifetime gas-tightness of the tted connection is ensured by the state of permanent elastic pre-tension, which is produced by the radial forces of the LOKRINGs acting in the opposite direction...

LOKRING ALUMINIUM CONNECTORS ® TECHNICAL SPECIFICATIONS Reference standards: EN 378-2 and EN 16084 Max. operating pressure: 25 bar (360 psi) Admissible refrigerants: Suitable for all HCs, HFCs and mixtures. Not suitable for NH3. Temperature range: -50°C up to 150°C (-58°F up to 302°F) Tube diameter range: 2 to 9 mm (5/64” to 5 /16”) Minimum tube wall thickness: 0.5 mm Approvals: TÜV (Registered No. 44 780 08 344780) UL (File SA12004) MATERIAL COMBINATIONS

06 | LOKRING TUBE CONNECTIONS

LOKRING TUBE CONNECTIONS | 07 LOKRING TUBE CONNECTIONS ®

STARTER KITS HAND ASSEMBLY TOOL ASSEMBLY JAWS LOKPREP SANDPAPER DRYERS STRAIGHT CONNECTORS STRAIGHT REDUCING CONNECTORS STRAIGHT CONNECTORS WITH SCHRADER VALVE

LOKRING® STARTER KITS For a perfect start in the world of quick and, above all, low-cost repairs to plug-in refrigeration equipment. Article no. Article name Article name LOKTOOL HMRK-V Article name

ASSEMBLY TOOLS LOKTOOL HMRK-V Our patented hand assembly tools were developed especially for LOKRING assembly. You only need one tool, because the assembly jaws can be exchanged quickly and easily. Since the handles are offset on both sides, the HMRK-V is also suitable for exible use during work in hard-to-reach areas.

ASSEMBLY TOOLS LOKRING HAND ASSEMBLY TOOL Specially developed for the LOKRING assembly. Patented lever mechanism for assembly with minimum effort. Article name LOKTOOL HMRK-V Article name Assembly jaws are easy to change for different tube diameters. Both handles bend for use in hard-to-reach areas. Made in Germany! IMPORTANT: Assembly jaws not included. ASSEMBLY JAWS FOR LOKRING CONNECTIONS TYPE 00 Suitable for the LOKTOOL HMRK-V and HMRK-L hand assembly tools. Suitable for double-sided assembly of LOKRING type 00 connections. Article name ASSEMBLY JAWS FOR LOKRING CONNECTIONS TYPE 50...

POSSIBILITY A Move the nozzle 360° around the tube to distribute the LOKPREP evenly. POSSIBILITY B Rotate the moistened tube through 360° inside the joint. POSSIBILITY C Rotate the joint through 360° around the end of the tube. Metal tubes can have longitudinal grooves on the surface from production. These production-related faults can be compensated quite easily by moistening the tube ends to be connected with LOKPREP uid before assembly. Thanks to its capillary characteristic, it can even ow into microscopic cavities and ll these out completely. LOKPREP is not an adhesive, rather an...

ANAEROBIC SEALANT ® Specially developed for the LOKRING assembly. © Must be used for all LOKRING assemblies. tube surface. © Ensures that every LOKRING connection Article no. Article name