

カタログの抜粋

OPTISPRAY F ROVING REDUCE RESIN, INCREASE PERFORMANCE ® Product Benefits OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. • Multi-end gun roving reinforcement using Advantex® glass fiber, which combines the electrical and mechanical properties of traditional E-glass with the acid corrosion resistance of E-CR glass. • Advantex® glass roving has a sizing system designed to provide optimal performance for spray-up applications where fast wet-out speed is preferred. FOR FAST WET-OUT AND EASY WORKABILITY Increased Efficiency • Low fuzz combined with easy chopping, roll-out and uniform dispersion saves time. Reduced Cost • Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. Great Performance • Good mechanical properties, great surface quality, excellent conform-ability, doesn’t trap air, low spring back. Fast Wet-out • Designed to provide optimal performance for spray-up applications where fast wet-out speed is preferred; great performance in various types of part complexities. Packaging to Reduce Waste and Increase Floorspace • The new, optional 4-high pallet design increases the amount of fiberglass material in the standard pallet footprint by 33% enabling producers to fit more pounds within a distribution center, on a truck during delivery, and in the manufacturing site with no impact to floor space. OptiSpray® F Roving can be used in a variety of spray-up applications including: boats, truck caps, vehicle body parts, bath tubs, showers, spas, tanks, and applications with complex molds or sharp curvatures. Product Data Sheet | OptiSpray® F
カタログの1ページ目を開く
Technical Characteristics (Nominal Values) Availability and Packaging (Standard Reference) LINEAR WEIGHT OF ROVING (Tex) YIELDS (Yds/Lb) • Each OptiSpray® F doff is protected by a tack-wrap polythene film and identified by an individual label; please do not remove film during use. • Creel-Pak™ and customer specific packaging may be available upon request. TOTAL NUMBER OF DOFFS PALLETS APPOX. FIBERGLASS OptiSpray® F Rov. Close Top™ 2400/3000 Individual Boxes Optional OptiSpray® F Rov. Creel-Pak™ 2E 2400 *Add 35 to 45 kg to obtain gross weight. Each doff has a self-adhesive identification...
カタログの2ページ目を開くVetrotex - OCV Reinforcementsのすべてのカタログとパンフレット
-
M723B
2 ページ
-
M123
2 ページ
-
VL9202
2 ページ
-
P209
2 ページ
-
M113
2 ページ
-
P207
2 ページ
-
973 & 973CX1
2 ページ
-
OPTISPRAY®
2 ページ
-
U101
2 ページ
-
UNIFILO® 800
2 ページ
-
UNIFILO® 700
2 ページ
-
UNIFILO® 500
2 ページ
-
UNICONFORM®
2 ページ
-
M723A
2 ページ
-
M705X1
2 ページ
-
M705
2 ページ
-
M6 X1
2 ページ
-
M524-C64
1 ページ
-
M524-ECR30S
1 ページ
-
M524-ECR30A
1 ページ
カタログアーカイブ
-
FoodContact™
2 ページ
-
Silentex® Machine
6 ページ
-
XStrand® H MCX24
2 ページ
-
111A
2 ページ
-
SE 1500 Roving
2 ページ
-
Vitrostrand
2 ページ
-
Thermopreg Plates
2 ページ
-
ME1037
2 ページ
-
P213
2 ページ
-
SE4121
2 ページ
-
P249
2 ページ
-
K247
2 ページ
-
M103
2 ページ
-
E-CSM
2 ページ
-
M133
2 ページ
-
M720
2 ページ
-
M821B
2 ページ
-
M8643
2 ページ
-
Unifilo® U101
2 ページ
-
OptiSpray H Roving
2 ページ
-
Thermopreg fabrics
2 ページ
-
ME3023
2 ページ
-
WUCS_Optiflow_790C
2 ページ
-
MultiEndRovSMC_905A
2 ページ
-
MultiEndRov_956
2 ページ
-
MultiEndRovSMC_957
2 ページ
-
MultiEndRov_973
2 ページ
-
MultiEndRovSMC_985
2 ページ
-
MultiEndRovingSMC
2 ページ
-
MultiEndRov_P215
2 ページ
-
MultiEndRov_R07
2 ページ
-
MultiEndRov_R63SX3
2 ページ
-
MultiEndRov_P224
2 ページ
-
Unidirectional
2 ページ
-
Triaxial Fabrics
2 ページ
-
Quadraxial Fabrics
2 ページ
-
Double Bias fabrics
2 ページ
-
Biaxial Fabrics
2 ページ
-
Multimat
2 ページ
-
P218
2 ページ
-
PZ
2 ページ
-
Milled fibers REV
2 ページ
-
Multiconform
2 ページ
-
U543
2 ページ
-
U500
2 ページ
-
U800
2 ページ
-
U700
2 ページ
-
M534
2 ページ
-
M134
2 ページ
-
M153
2 ページ
-
M5
2 ページ
-
BMC P316
2 ページ
-
BMC R63SX1
2 ページ
-
BMC P317
2 ページ
-
BMC 979
2 ページ
-
GRC Spray Roving
2 ページ
-
TWINTEX® R PP
2 ページ
-
Roving for Chopping
2 ページ