E-CSM
1 / 2ページ

カタログの抜粋

PRODUCT INFORMATION E-CSM Light Weight Chopped Strand Mat for Hand Lay Up Hand-Lay PRODUCT DESCRIPTION E-CSM is made from E-glass low size chopped strands glass held together by an emulsion binder which makes it perfectly suitable for use with polyester resins. The basic strand has a sizing system containing a silane coupling agent. PRODUCT REFERENCE Example E-CSM 100 130 1ST :E-CSM 100-130 1ST :OCV Reinforcements™ code for this chopped strand mat :roll weight (g/m2) :roll width (cm) :number of trimmed edges (zero, one or two) number FEATURES AND PRODUCT BENEFITS • Very high smoothness of the laminate surface Highly suitable for good surface appearance Good drapability Highly suitable for first layer with gel coat Good compatibility with vinylester and epoxy resins. TECHNICAL CHARACTERISTICS (nominal values) WEIGHT (G/M²) Specifications on average values. VISUAL CHARACTERISTICS or POSSIBLE DEFECTS All the visible defects of the chopped strand mat are classified as visual defects. The maximum number of visual defects allowed for a 100m2 roll is 10. Possible defects are: • Unbound edges • Holes (> 40mm) or tears • Dirt spots (greater than 5mm) • Unopened strands • Accumulation of fibers (>40mm) or binder (>20mm)

カタログの1ページ目を開く

E-CSM Light Weight Chopped Strand Mat for Hand Lay Up Hand-Lay LABELING PRODUCT AVAILABILITY STANDARD WEIGHT (G/M²) The mat should be stored in its original packaging in a dry and cool place. Best conditions are at temperature from 10 to 35°C and humidity between 35 and 85 %. If you store the product at lower temperatures, please move the soon to be processed pallets to the production area 24 hours e ahead of time; remove part of the protective cover of each roll to prevent condensation. You can stock pallets one on one with a plywood plank in between the two. A roll is considered to be...

カタログの2ページ目を開く