
カタログの抜粋

PRODUCT INFORMATION Tail Long Thread 120° Designed and made in New Zealand, TRUDESIGN® Tail Long Thread 120° fittings are the superior composite connection for fitting hose to threaded fittings. Available in five sizes; TRUDESIGN® Tail Long Thread 120°s are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the material provide dramatic strength, stiffness, toughness, and dimensional stability. TRUDESIGN® fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush. Key Features: Feature: Manufactured from a glass-reinforced nylon composite High strength and light weight Immune to corrosion and electrolysis Long life with no concerns over decreased performance due to corrosion. No bonding required Chemical resistant Impervious to diesel, petrol and antifouling paints Will not degrade or discolour with ultraviolet light from the sun High quality surface finish Will not discolour with green film as similar bronze fittings do BSPP (Parallel) threads Universal compatibility to TRUDESIGN® Ball Valves, threaded fittings, and other marine components Large operating temperature range Suitable for all marine environments, from -20°C to +100°C Page 1 of 3 LEADERS IN MARINE COMPOSITE FITTINGS Web: www.trudesignplastics.com Technical enquiries: support@trudesignplasti
カタログの1ページ目を開く
PRODUCT INFORMATION Specifications: Threads on the Tail Long Thread 120°s are BSPP (British Standard Pipe Parallel). TRUDESIGN® parallel threads are designed so that sealant or PTFE thread tape is applied, and then the fitting screwed into place. A main advantage of parallel threads versus tapered threads is that there is far greater engagement between two mating parallel threads which in turn provides maximum strength and watertight sealing ability. Since sealing is achieved through use of a sealant or thread tape, fittings can be positioned anywhere around 360°, unlike tapered fittings...
カタログの2ページ目を開く
PRODUCT INFORMATION Part Numbers & Weights: Model / Size Part Number Tail 25mm 1” BSP Long Thread 120° Tail 32mm 1¼” BSP Long Thread 120° Tail 38mm 1¼" BSP Long Thread 120° Tail 38mm 1½” BSP Long Thread 120° Tail 50mm 2” BSP Long Thread 120° Dimensions: Dimensions are in millimetres & [inches] All dimensions nominal TruDesign Plastics Ltd. accepts no responsibility for products which are improperly installed or tampered with. Although the information presented in this product information sheet is believed to be accurate and reliable, no responsibility for inaccuracies can be assumed by...
カタログの3ページ目を開くTru Design Plastics Ltd. のすべてのカタログとパンフレット
-
Reducers
3 ページ
-
Y Pieces
3 ページ
-
Connector Threaded
5 ページ
-
Aquavalve 120° Tails
5 ページ
-
Aquavalve 90° Tails
5 ページ
-
Aquavalve Tails
5 ページ
-
Load Bearing Collars
5 ページ
-
INTAKE STRAINER
4 ページ
-
Carbon Filter
3 ページ
-
Marine Hinges
2 ページ
-
Multistrap
1 ページ
-
Pump
2 ページ
-
Solenoid Vented Loop
3 ページ
-
Manual Aquavalve
5 ページ
-
Electronic Aquavalve
4 ページ
-
Manual Ball Valve
7 ページ
-
Monitored Ball Valve
8 ページ