Carbon Filter
1 / 3ページ

カタログの抜粋

PRODUCT INFORMATION CARBON FILTER – HOLDING TANK A Carbon Filter is a useful addition to a holding tank vent pipe to reduce the odour of decomposing sewage. The activated carbon in the filter absorbs and converts the odours from your holding tank. The Carbon Filter is not a substitute for good ventilation of the holding tank. It is designed to remove excess odour from a properly functioning holding tank. Holding tanks require good ventilation to ensure aerobic decomposition. Anaerobic decomposition due to lack of oxygen is the major cause of holding tank odour through H2S production (rotten egg smell). MODELS Part # Carbon Filter Holding Tank Doc: PIS - Carbon Filter 3.0.doc LEADERS IN MARINE COMPOSITE FITTINGS

カタログの1ページ目を開く

PRODUCT INFORMATION KEY FEATURES Feature : Odour removal Reduces holding tank smells topside. Mounting options Saddles for mounting, or screw directly to a bulkhead. Hose size options Dual tail setup to fit 19mm and 25mm hose. Clear bottom Able to check fluid has not entered filter. DIMENSIONS All dimensions in mm. All dimensions nominal. Doc: PIS - Carbon Filter 3.0.doc LEADERS IN MARINE COMPOSITE FITTINGS

カタログの2ページ目を開く

PRODUCT INFORMATION INSTALLATION Full installation instructions are on the Carbon Filter. Note: For optimum operation install Carbon Filter vertically. The filter should not be installed at less than a 45° angle to vertical. Tru-Design recommend installing the filter with the clear portion on the bottom so fluid overflow can be seen. SERVICING The Carbon Filter requires replacement annually. The label has an area for recording the date of installation. Tru-Design Plastics Ltd. accepts no responsibility for Products which are improperly installed or tampered with. Although the information...

カタログの3ページ目を開く

Carbon Filter 1 / 3ページ

カタログの抜粋

Tru Design Plastics Ltd. のすべてのカタログとパンフレット

Carbon Filter
1 / 3ページ