Aquavalve 120° Tails
1 / 5ページ

PRODUCT INFORMATION AQUAVALVE ACCESSORIES The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is available to suit the variability of marine plumbing applications. These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. MODELS TAILS Straight Tails suited to standard sizes of tubing. Part # * PKG denotes product is packaged in a plastic bag with header card. Other product is packaged loose. Doc: PIS - Aquavalve Accessories 3.0.doc LEADERS IN MARINE COMPOSITE FI

PRODUCT INFORMATION THREADED CONNECTOR The threaded connector can be used to connect the Aquavalve or 3 Way Connector to rigid PVC plumbing. The threaded connector interfaces with a PVC fitting designed for connection to steel piping (available as part of most PVC piping ranges). Part # PLUG The plug can is used to block one port when parts of the system are not yet installed, or maintenance is being completed and the system still needs to be used. Part # 90° TAILS Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come packaged with a Blue Seal to allow...

PRODUCT INFORMATION KEY FEATURES Feature : Manufactured from a glass reinforced nylon composite High strength and light weight. Long tail feature The use of 2 hose clamps is recommended for secure hose fitting. Immune to corrosion and electrolysis Long life with no concerns over decreased performance due to corrosion. Chemical resistant Impervious to diesel, petrol and antifouling paints. These fittings will not break down with ultraviolet light or discolour from the sun. High quality surface finish Will not discolour with green film as similar bronze fittings do. Separate sealing component...

PRODUCT INFORMATION THREADED CONNECTOR Doc: PIS - Aquavalve Accessories 3.0.doc LEADERS IN MARINE COMPOSITE FITTINGS

PRODUCT INFORMATION INSTALLATION Full installation instructions are supplied with the Aquavalve or 3 Way Connector. Use of the Tru-Design Aquavalve spanner is recommended for tightening fittings. This product is supplied with all Aquavalves. All Aquavalves and 3 Way Connectors are supplied with red seals. No seal is supplied with the straight fittings as angle is not important. All angled fittings are supplied with a blue seal. This allows the angled fitting to be rotated to a more suitable position if required. It is recommended that 2 hose clamps are used to secure the hose to the...