カタログ >
TRANBERG >
TEF 1060 Ex eb HIGH VOLTAGE WITH A-BLOCK SOLUTIONS 1,1-11 kV

TEF 1060 Ex eb HIGH VOLTAGE WITH A-BLOCK SOLUTIONS 1,1-11 kV
1 / 2ページ

カタログの抜粋

TEF 1060 Ex eb HIGH VOLTAGE WITH A-BLOCK SOLUTIONS 1,1-11 kV - 1

HV ENCLOSURE TEF 1060 Ex eb HIGH VOLTAGE WITH A-BLOCK SOLUTIONS 1,1-11 kV ZONE 1 , ZONE 2 & SAFE AREA HC€ The 1060 enclosure system is the answer to most situations which require the need of acid resistant stainless steel enclosures. Tranberg A-block spacers are IECEx /ATEX approved from 1,1 Kv up to 11 Kv. High Voltage JB's can be used with current load up to 100Amps. Tranberg can customize all kinds of solutions up to 11kV. TECHNICAL DATA FEATURES AND BENEFITS Marking to 2014/34/EU: Protection: Enclosure material: Safety cover: Finish: Earthing on JB: Earthing cable: Amb. temperature: Cable gland: • Compact solutions • Flexible design • up to100A • Up to 11kV • CU bar for earthing • Bottom side entries • Can be used in Non Ex environments • Safety cover IP2X • Padlock facility • ATEX and IECEx approved • Up to 50mm2 (35mm2 with ferrules) • Hinged door • Suitable for DC solutions Options: ° 7,0-11 kV on request ° Customized solution on request ° Fiber optical solutions ° Exi safety switch <£> II 2 G Ex eb IIC T4, T5, T6 IP66 Stainless steel AISI 316L / EN 1.4404 IP 2X Bright chemical dip Through studs on enclosure and gland plates Copper bar mounted on spacers -25°C - +40°C Silicone gasket: -50°C to 60°C Tranberg Ex cable glands as standard (not included with enclosure). Only appropriate ATEX/ IECEx certified glands, blanks and adaptors must be used. APPROVALS AND CERTIFICATES IECEx PRE 14.0001 Presafe 14ATEX4124 Enclosure solutions with optional technical specifications upon request. complies with: EN 60079-0:2012 EN 60079-7:2007 IEC 60079-0:2011 IEC 60079-7:2011 TRANBERG R. Stahl Tranberg AS E info@stahl-tranberg.com | stahl-tranberg.com Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T +47 51 57 89 00 | F +47 51 57 89 50 Office Oslo: Luhrtoppen 2 | N-1470 loarenskog | Norway | T +47 24 08 44 10

カタログの1ページ目を開く

TEF 1060 Ex eb HIGH VOLTAGE WITH A-BLOCK SOLUTIONS 1,1-11 kV - 2

Cross connection Partition plate The picture shows an example of the A-block assembly inside the TEF 1060 enclosure, part no. 1063155, HV 2,2kV L1/L2/L3x3pce - UT6mm2. Standard 2,2 kV High Voltage Enclosure Part No. Mounting bracket for A-block R. Stahl Tranberg AS E info@stahl-tranberg.com | stahl-tranberg.com Main office: Strandsvingen 6 | N-4032 Stavanger | Norway | T +47 51 57 89 00 | F +47 51 57 89 50 TRANBERG Office Oslo: Luhrtoppen 2 | N-1470 Lorenskog | Norway | T +47 24 08 44 10

カタログの2ページ目を開く