TA4-series
1 / 4ページ

Product Segments • Auto Motion • Ergo Motion The TA4 series is a compact, quiet and powerful actuator designed to fit an area specifically requiring a right angle motor versus tube configuration. The success of this design makes this actuator a perfect fit for a wide range of applications including computer carts, industrial work surfaces, office desks, etc. General Features Voltage of motor Maximum load Maximum load Maximum speed at no load Maximum speed at full load Minimum installation dimension stroke+140mm Color silver Protection class Hall sensor(s)

Rated Load Self Typical Locking Current Typical Speed No Load Rated Load The left diagram shows the speed and current figures under pushing condition. Speed would be the same if with 12V motor, but with double current consumption. 3 The self locking force above need to work with TiMOTION control system. in order to improve our products, TiMOTION products are subject changes without prior notice. TiMOTION reserves the right products displayed on its website or listed in its catalogue or other written materials drawn up by

Additional retracted length Stroke Limit Invalid Length 1 Above stroke recommendation is based on safety stroke limit, for each additional 50mm stroke, it needs to add 5mm for the retracted length. 1 If TA4's stroke is 201mm, the retracted length = 201mm+invalid length+5mm. 2 If TA4's stroke is 300mm, the retracted length = 300mm+invalid length+10mm.

Load and Speed See appendix Retracted Length Stroke+140mm (for front attachment 1,2) Stroke+160mm (for front attachment 3,4,5) Note : before selecting retracted length, please refer to the additional retracted length chart Rear Attachment Front Attachment 3 = U clevis, slot 6mm, hole 10mm 4 = U clevis, slot 6mm, hole 6.4mm 5 = U clevis, slot 6mm, hole 8mm Spindle Sub-Assembly Limit Switches Output Signals 0 = Without (standard) 2 = Push only Note : if choose #2 (ST-ST inner tube), it can't choose load & speed option #E or i 1 =Two switches at the retracted/extended positions to cut current...