カタログ >
Sperry Marine >
Gyrocompass_NAVIGAT_X_MK_2

Gyrocompass_NAVIGAT_X_MK_2
1 / 4ページ

カタログの抜粋

NORTHROP GRUMMAN Digital Gyrocompass System

NAVIGAT X MK 2 Digital Gyrocompass System OVERVIEW Standard Version The Sperry Marine NAVIGAT X MK2 digital marine gyrocompass system provides accurate North-speed error-corrected true heading as well as rate-of-turn data under all operating conditions and is a costeffective solution for all international carriage requirements. The NAVIGAT X MK 2 gyrocompass is a compact, one-unit design that runs on a 24-volt power supply with two independent DC inputs. It can drive up to four analogue repeaters and provides five additional serial data outputs and one six-steps/degree output. Based on the...

カタログの2ページ目を開く

Electronic Compass Transmitting Magnetic Compass (TMC) Version NAVITWIN IV Heading Management System Heading Diff Alarm Off Heading Alarm JUPITER Magnetic Compass with Flux Gate Speed: 1 input IEC 61162-1 or 200 pulses/nm Steering mode status: 1 input Man/Auto from selector Alarm mute: 1 input from external control Power Main power supply: 18 VDC - 36 VDC Backup power supply: 18 VDC - 36 VDC Outputs Switch-Over Unit 4 outputs NMEA TTL: gyrocompass heading, rate of turn, heading reference status to compass repeaters 1 output Sensor Data 1 RS 422: gyrocompass heading, rate of turn, heading...

カタログの3ページ目を開く

MAIN FEATURES ACCESSORY EQUIPMENT data • Permanent storage of operational elapsed (gyrosphere current, temperature, operation time) • Over 250 Sperry Marine service locations worldwide POWER CONSUMPTION Start-up Steering repeater compass for console mounting with 360° and 10° compass cards Weight: 1.5 kg Each repeater (analogue) Prismatic azimuth device PV 23 Weight: 1 kg 6W Bearing repeater compass with 360° card in a stand with azimuth device PV 23 Total weight: 16.1 kg DIMENSIONS AND WEIGHT Width Console repeater compass with 360° card Weight: 1.5 kg NAVIPRINT Navigation Data Printer...

カタログの4ページ目を開く