カタログ >
Southco >
P2 ? Flush Pull Lockable and Nonlockable Versions

P2 ? Flush Pull Lockable and Nonlockable Versions
1 / 4ページ

カタログの抜粋

P2 ? Flush Pull Lockable and Nonlockable Versions - 1

Low profile · Lift or pull · Single hole mount ACTUAL SIZE Material and Finish ABS plastic, black Performance Details Max. static load: Lifting / pulling: 1300 N (300 lbf) Door thickness (see table) • Snap-in installation • 2 sizes Flammability rating: UL94-HB or UL94-V0 Operating temperature range: -50°C (-60°F) to 60°C (140°F) Textured matte finish ACTUAL SIZE Performance details are based on installation in a 1.2 (.048) steel door. Max. loads are limited by door strength. 132±0.3 (5.20±.01) Larger P2 87.5±0.3 (3.45±.01) Smaller P2 30.7±0.15 (1.210±.005) Part Number Part Number Door Thickness Range Dimensions in millimeters (inch) unless otherwise stated

カタログの1ページ目を開く

P2 ? Flush Pull Lockable and Nonlockable Versions - 2

P2 Flush Pull - Lockable Low profile · Lift or pull · Single hole mount • Snap-in installation • Lockable • Lock core included or sold separately • Cam sold separately Type B (Counter-Clockwise) Version Shown Cam shown in locked position * Door Thickness (see table) Lock parts: Zinc alloy powder coated, Brass, Steel zinc plated, Buna-N "For pulls without lock core,lock core sold separately, see page 183. "Cam sold separately. See our handbook page 191 or www.southco.com." Pull: ABS plastic, black 2 (0.08) Typical Wall Thickness Cam Grip Cam forward No Offset (Straight) Cam Cam Reverse * Cam...

カタログの2ページ目を開く

P2 ? Flush Pull Lockable and Nonlockable Versions - 3

SOUTHCO Key-Choice System ® Lock Cores - Disc Tumbler Lock Core Part Number Keying Shuttered stainless steel scalp Non shuttered stainless steel scalp Non shuttered black powder coated Non shuttered chrome plated KA - Keyed Alike: All lock cores are the same key code KD Keyed Differently: Multiple key codes provided in a non-master key system Lock Cores - Tool Operable Lock Core Part Number MKKD - Master Keyed, Keyed Differently: Multiple key codes provided in a master key system Phillips recess Chrome plated Black powder coated Part Number includes 1 lock core and 2 keys Head Style Lock...

カタログの3ページ目を開く

P2 ? Flush Pull Lockable and Nonlockable Versions - 4

Cams & installation Sealing washer (if included) Installation Notes 1. Place sealing washer onto housing (if included) and put through the mounting hole (see panel preparation). Housing Door 2. Install mounting nut and tighten to 5 Nm (44 inlbf). Screw & lock washer Stop washer 3. Install cam to assembly Properly orientate for rotation and grip. 4. Install screw. Tighten to 4 Nm (35 inlbf). Max. door thickness (see table page 187) Material and Finish Cam: Steel plated Part Number Selection S Style C No hook H Hook type 1 L Hook type 2 Order lock and cam separately Cam part number (no lock)...

カタログの4ページ目を開く