SILLINGER-680RIBUM
1 / 1ページ

Boat shown with options. The 680 RIB UM VP is extremely versatile: console location, seats, lockers, etc… It can be adjustable according to the specific needs of each mission. Stainless steel structural reinforcements allow the 650 to be fitted with many equipment and accessories dedicated to professional and military heavy duty : underdeck fuel tanks up to 300 liters, gun mount, towing mast, etc…. The totally flat deck allows to support 18 persons, ideal for troops or heavy and voluminous loads transport. With a deep Vee and large diameter floats, it is a fast, stable and easy navigating boat, efficient whatever the climatic conditions and kinds of operations. SPECIFICATIONS Overall length Overall width Weight empty without engine Maximum power Capacity Maximum load CSM fabric Compartments number Internal length Internal width Float diameter Recommended power Colour of tubes 5 5.15 m (16.9’) 1.35 m (4.43’) 0.60 m (1.97’) 150-200 HP Black, grey, red, NATO green STANDARD FEATURES The floats fabric is made of polyester support inside coated with Neoprene and outside coated with CSM. This fabric is labeled ORCA 1670 decitex. Hand-made assembly and double cold glue vulcanization by high skilled workforce are performed. An additional strip is glued at the edge of each panel junction as well as a strip inside all assembled parts in order to ensure a perfect watertight quality preventing from any leakage. The outer CSM coating is an elastomer resistant to heat and abrasion in opposition to the fabrics coated with plastomer (PVC). Thus, Sillinger uses fabrics of very strong resistance to extremely high or low temperatures. - 1 Stainless steel bow ring - 1 Rear inspection door - 1 ABS bow davit - 1 Engine fixing and protecting plate - 1 Anchor box - 2 Rings on transom - 6 Side handles - 2 High flow self bailers with rubber pipes - 2 Handrails on boldrope - 2 Internal lifelines - 4 Paddles with support on floats - 1 Peripheric anti-chafing stripe (320 mm, then 240 mm) - 2 Non-slip passenger rubber stripes - 4 Stainless steel underdeck beams - 1 High flow foot pump - 1 Repair kit - 1 Instructions manual HULL The hull is made of gel coat and ISO resin stratified with mat and rowing fiberglass . Transom and deck are reinforced with CTBX marine plywood core and lamination. Crossing stainless steel beams also strengthen the hull. The deck is self-draining and anti-slip. SILLINGER S.A.S ZI de Buray 41500 MER FRANCE OPTIONAL EQUIPMENT You can customize your boat to your specific needs. See optional equipment in the Sillinger professional website : www.sillinger.com. Tel: +33(0)2-54-81-08-32 Fax: +33(0)2-54-81-32-95 E-mail: contact@sillinger.com Web: www.sillinger.com Sillinger, a Marck Group know-how