Side_Power_DC_2012_WEB
1 / 32ページ

Thruster Systems

Confidence by control www.side-power.com

"There are two types of boaters: those who have a bow thruster and those who wish - Eric Vader - World Boater The boat builder's choice 4 Planning your system 7 Tunnels and sternthruster kits 19 Over 100 years of service 2008 marked Sleipner Motor's 100th year serving the boating community. While our product development focuses on making boating easier, safer, more accessible comfortable, our historic commitment has always been to offer the highest quality and reliability to our customers. Over the years we have grown to be the global leader in thrusters (with well over 100,000 put into...

The boat builders choice Leading boat builders all over the world choose Side- Power for performance, reliability, ease of installation and unrivalled safety features. This commitment to quality and product development has made the Side- Power range of thrusters the benchmark in the indus- The high performance of a Side-Power thruster is a result of our continuous efforts in product development and testing. • propulsion technology know-how • lightweight composite propellers • purpose-built high power electric motors • streamlined gearhouse design Based on our experience and cooperation with...

Thruster sizing By definition, any thruster will to some extent do a job in any boat. The key is to ensure that the chosen thruster will do the job you want it to in your boat. This is one of two main factors deciding the right thruster size for each boat. Today most pleasure craft over 35' have a bow thruster as standard equipment which normally will meet the expectations of most cus- tomers when using the boat under normal weather conditions. The sizes used by the boat builders will vary depending on the boat's intended usage and price level. In today's production boats, the typi- cal...

To enable the most safe and easy installation as well as the best possible performance for a variety of boats and usages, Side-Power thrusters are offered in several versions to satisfy all requirements. SE series — Standard bow and stern thrusters The standard bow and stern thruster series are the base for all our extensive range of DC electric thrusters. They are fitted in a tunnel through the bow, or into our stern tunnels to use as a stern thrusters. The electric motors, solenoids, patented IPC control system and the mechanical parts of the propulsion system are all totally custom...

Dual Thruster Application Planning your system Bow BOW Control cable 5-lead 6 1278-xxM 5-LEAD CONTROL CABLE Control cable 5-lead 6 1278-xxM 5-LEAD CONTROL CABLE Stern STERN Bow BOW T-connector 5-lead 6 1273 5-LEAD Y-CONNECTOR T-connector 6 1273 5-LEAD Y-CONNECTOR 5-lead STERN Stern Switch Switch 5A fuse 5A fuse Bow Stern BOW STERN Control cable 5-lead 6 1278-xxM 5-LEAD CONTROL CABLE Control cable 4-lead 6 1277-xxM 4-LEAD CONTROL CABLE 6 1278-xxM 5-LEAD Control cable CONTROL CABLE 5-lead Control cable 4-lead 6 1277-xxM 4-LEAD CONTROL CABLE A complete thruster system There are several...

With many boat customers now having had several boats with thrusters, their functional demand of their thruster sys- tem has increased so that many choose to upgrade to more powerful thrusters than standard and even request hydraulic thrust- er systems to ensure that run-time limita- tions in DC electric thrusters will not be a problem. However, very powerful single speed thrusters can, in light weather condi- tions, be a bit difficult to use as they push the boat too fast, and with the focus on living space in modern boats, often there just is no room for a hydraulic system. DC Speed...

System features A DC Speed Control system contains three main elements - proportional control panels, a power control unit and a DC electric thruster - all tied together with the new S-link control system. The thrusters used in a speed control system is almost identical to the familiar SE range of DC thrusters, the only difference being the addition of a temperature sensor and a new electronic control box. All mechanical and main electric parts are from the well proven thruster range produced by Side-Power for many years. All 12 & 24 volt DC electric thrust- ers produced by Side-Power can...

S-link S-link System of S-link syste Wiring S-link is a ”CAN” based control system with full intelligent communication between all units in the system, much like a computer network. Explaining S-link Examp Wiring unique keying and system S-link is ”CanBus” based compact waterproof - Round, control Wiring ofaS-link system andsystem plugs withof S-linkcolor coding Main advantages include: to avoid faulty hookup with full intelligent communication - Unlimited number of commands or information transfer on a single cable between all units in the system, much like - User feedback at panel...

CanBus control system Examples of the control wiring with S-link system for boats with two control positions and two DC proportional thrusters. Depending on the boat's construction, there might be several different ways to route the S-link backbone. Find the most practical way to implement the backbone and remember that the S-link equipment do not need to be connected in a specific Example of the control wiring with S-link system for boats with one control position and one retractable thruster Example of the control wiring with S-link system for boats with proportional retractable thrusters

Side-Power features The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make a little bit more aggressive on some models, increasing the thrust on most thrusters. Please see individual information on each new thruster for more details. • Noise reductions of up to 75% measured in controlled environments • The expected and tested normal noise...