カタログ >
SEACON (Europe) >
SAPL-DS-0110 MSSQ FCR Rev 3

SAPL-DS-0110 MSSQ FCR Rev 3
1 / 2ページ

カタログの抜粋

pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET jppn ci^kdba `lkkb`qlo ob`bmq^`ib SEM-MOUNTED ELECTRICAL BULKHEAD CONNECTION FOR DEEPWATER MUX CABLE CONNECTOR DESCRIPTION The jppnJc`o has been part of pb^`lk's standard product line for over 30 years and has been used for connection to MUX cable connectors in the drilling industry for more than 10 years. The receptacle mounts to existing hole penetrations on many subsea modules. The connection side of the receptacle interfaces with pb^`lk's standard jppn Cable Connector Plug line. Typical connection is to a jppnJorccJkbh, positive pressure compensated MUX cable connector. The jppn series of MUX terminations is available with electrical contacts only and electrical-fiber optic hybrids. Standard body material is passivated 316 SST although other materials are available upon request. KEY FEATURES · Mates to jppnJorccJkbh MUX cable connector · Mounting o-ring test port · Dual o-ring seals throughout · Depth Rating: 20,000 psi mated, 5,000 psi open-face · Mounts in standard jppn cavity, and others - see AVAILABLE CONFIGURATIONS DESIGN RATINGS & TESTING · Design pressure varies depending on application. 5000 psi standard · Design life: 20 years · Conductor Insulation Resistance: >1,000 Mohms @ 500 VDC MATERIALS · Shell: Standard 316 SST, custom materials available · Internal stainless steel parts: 302, 304, 316, 15-7 PH · Insert: Glass Reinforced Epoxy SAPL-DS-0304 jppnJc`o Rev 3 December 2014 Page 1 of 2 · Electrical contacts: Gold-plated copper · O-Rings: Nitrile (formerly known as Buna N) · Optical Contacts: Zirconia ceramic pb^`lk Advanced Products, LLC. 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.se

カタログの1ページ目を開く

pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET PRINCIPLE OF OPERATION The jppnJc`o uses flange-mounting to secure it to a bulkhead or vessel. Flange diameter varies depending on the application. Dual o-rings; one radial and one facial, provide sealing of the base. These o-rings are testable via the test port seen in Figure 2. A glass reinforced epoxy (GRE) 'insert' provides electrical isolation. The mating side of the receptacle, shown on the right, also uses radial and facial o-rings for sealing to the cable connector plug (CCP). O-RING TEST PORT METAL SHELL COPPER WIRE Electro-Optical...

カタログの2ページ目を開く