カタログ >
SEACON (Europe) >
SAPL-DS-0004-CM2000-Rev-16-low-res

SAPL-DS-0004-CM2000-Rev-16-low-res
1 / 4ページ

カタログの抜粋

molar`q==a^q^pebbq `jOMMM HIGH INTEGRITY, WET-MATE, ELECTRICAL CONNECTORS DESCRIPTION The `jOMMM underwater mateable electrical connector is modular in design and particularly well suited for adaptation to special designs, however it is also available in industry standard configurations. The unique design features combine superior electrical isolation and ensure the highest connector reliability. KEY FEATURES · Over 2,822 units sold worldwide · Field proven track record with over 120 million accumulated operating hours · Mean Time Between Failure (MTBF) of better than 26 million hours · Modular electrical contacts · Oil filled, pressure balanced socket contacts · Redundant sealing barriers for each contact · No single point failures · Extensive qualification testing data available · Successful completion of long-term testing (3 years) by an independent body · Excellent track record of operation in the field · · · · · · · · · · · Simple and robust with few moving parts Voltage ratings up to 3.3kVAC phase-to-earth Current ratings up to 100 amps Rated for deepwater applications PBOF hose or molded interface terminations Wide operational temperature rating Elastomers have over 20 years of use underwater Stab, diver or ROV configurations Many different body materials available Industry standard mounting for bulkhead connectors Patented design and features QUALITY · pb^`lk Advanced Products, LLC operate a Quality Management System certified to ISO 9001:2008. pb^`lk Advanced Products, LLC. April 2011 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com SAPL-DS-0004 `jOMMM Rev 16 Page 1 of 4

カタログの1ページ目を開く

molar`q==a^q^pebbq CONFIGURATIONS · Stab, diver and ROV configurations · Ø2mm, Ø3mm, Ø6mm and Ø8mm electrical contact sizes available · Standard 4, 7 and 12 contact configurations available in Ø2mm sizes · Modular contacts · Other configurations from 1 to 19 contacts · Oil filled, pressure balanced socket contacts · Redundant sealing barriers for each contact · Available in both plug and receptacle configurations: · Flying lead · Bulkhead mounted, flange mounted · Straight terminations, 90º terminations · Omnitec MKII pressure balanced oil-filled hose interface · Molded terminations ·...

カタログの2ページ目を開く

molar`q==a^q^pebbq PRINCIPLE OF OPERATION The critical electrical contact is made without exposure to external contamination in a harsh subsea environment. This is achieved as described by the following mating sequence: Step 1: The contact pin enters the outer bladder entry of the receptacle contact. Step 2: The contact pin is wiped and bathed in dielectric fluid as the entry throat maintains a force around the pin ensuring a secure seal. Step 3: The contact pin continues and enters a second inner bladder entry and is wiped and bathed in dielectric fluid again. Step 4: The pin engages with...

カタログの3ページ目を開く

molar`q==a^q^pebbq QUALIFICATION TESTING Full details of this testing are highlighted in pb^=`lk® document SC-ENG-1102. (1) Original Performance & Qualification Testing - Performed by independent third party Insulation resistance, thermal shock, misalignment (radial, angular, rotational and axial-separation), cold temperature (36°F-40°F (2°C-4°C)), silted seawater at ambient and pressure (2700psi (186bar)), clear seawater at ambient and pressure (2700psi (186bar)), drop tests, power on mate/de-mate at 600 volts. (2) Long-term testing - Performed by independent third party in Norway 3 years...

カタログの4ページ目を開く