

カタログの抜粋

pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET `jOMMM 3.3kVAC HIGH INTEGRITY, WET-MATE, ELECTRICAL CONNECTORS DESCRIPTION The `jOMMM 3.3kVAC underwater mateable electrical connector is modular in design and particularly well suited for adaptation to special designs, however it is also available in industry standard configurations. The unique design features combine superior electrical isolation and ensure the highest connector reliability. Over 180 `jOMMM 3.3kVAC units sold worldwide Over 2,700 `jOMMM units in total sold worldwide Modular electrical contacts Oil filled, pressure balanced socket contacts Redundant sealing barriers for each contact No single point failures Extensive qualification testing data available Simple and robust with few moving parts Voltage ratings to 3.3kVAC phase-to-earth Current ratings up to 60 amps Rated for deepwater applications PBOF hose or molded interface terminations Wide operational temperature rating Elastomers have over 20 years of use underwater Stab, diver or ROV configurations Many different body materials available Industry standard mounting for bulkhead connectors Patented design and features High quality electrical high-current wire QUALITY · pb^`lk Advanced Products, LLC operate a Quality Management System certified to ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007. pb^`lk Advanced Products, LLC. 1321 Nelius Road, PO Box 767, Bellville, Texas 77418, USA TEL: +1 (979) 865 8846 FAX: +1 (979) 865 8859 E-Mail: sales@seacon-ap.com Website: www.seacon-ap.com
カタログの1ページ目を開く
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET CONFIGURATIONS · Stab, diver and ROV configurations · Ø3mm and Ø6mm electrical contact sizes available · Standard 1, 4, 7 and 12 contact configurations available · Modular contacts · Other configurations available upon request · Oil filled, pressure balanced socket contacts · Redundant sealing barriers for each contact · Available in both plug and receptacle configurations: · Flying lead · Bulkhead mounted, flange mounted · Straight terminations, 90º terminations · Omnitec MKII pressure balanced oil-filled hose interface · Molded terminations...
カタログの2ページ目を開く
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET PRINCIPLE OF OPERATION The critical electrical contact is made without exposure to external contamination in a harsh subsea environment. This is achieved as described by the following mating sequence: Step 1: The contact pin enters the outer bladder entry of the receptacle contact. Step 2: The contact pin is wiped and bathed in dielectric fluid as the entry throat maintains a force around the pin ensuring a secure seal. Step 3: The contact pin continues and enters a second inner bladder entry and is wiped and bathed in dielectric fluid again....
カタログの3ページ目を開く
pb^`lk ADVANCED PRODUCTS, LLC PRODUCT DATASHEET QUALIFICATION TESTING Full details of this testing are highlighted in pb^`lk document SC-ENG-1011. (1) Original Performance & Qualification Testing - Performed by independent third party Insulation resistance, thermal shock, misalignment (radial, angular, rotational and axial-separation), cold temperature (36°F-40°F (2°C-4°C)), silted seawater at ambient and pressure (2,700psi (186bar)), clear seawater at ambient and pressure (2,700psi (186bar)), drop tests, power on mate/de-mate at 600 volts. (2) Long-term testing - Performed by independent...
カタログの4ページ目を開くSEACON (Europe)のすべてのカタログとパンフレット
-
GRE
23 ページ
-
RUBBER-MOLDED_lres1
39 ページ
-
SUTA
2 ページ
-
MSSQ RUFF-NEK
2 ページ
-
DS-0500
2 ページ
-
DS-0412
2 ページ
-
DS-0410
2 ページ
-
DS-0402
2 ページ
-
DS-0401
3 ページ
-
DS-0370
1 ページ
-
DS-0183
2 ページ
-
DS-0180
2 ページ
-
DS-0120
2 ページ
-
DS-0100
3 ページ
-
DS-0090
4 ページ
-
DS-0080
4 ページ
-
DS-0063
2 ページ
-
DS-0061
4 ページ
-
DS-0040
2 ページ
-
DS-0030
1 ページ
-
DS-0018
3 ページ
-
DS-0016
3 ページ
-
MSS_Rev-VIII_lres1
21 ページ
-
U-MATE_Rev-I_lres1
11 ページ
-
ALL-WET_Rev-VII_lres1
29 ページ
-
SEA-MATE_Rev-III_lres2
20 ページ
-
SPECIALTY-PRODUCTS_lres
23 ページ
-
SWITCHES_lres1
14 ページ
-
FIELD-INSTALLABLE_lres1
20 ページ