カタログの抜粋
TIN BOOSTER TBT-Based Not Legal in the U.S. TIN ADDITIVE • Increase Tin in Islands 44 Plus & Biotin • Compatible with Most Tin Based Paints on the Market • Can Also Be Used on Aluminum Outboard Motors as Antifouling General Description Running Gear & Outdrives Seahawk Tin Booster is a straight tin based binder loaded with tin. Its high strength will add an extra kick to any tin-based antifouling. You can add the whole bottle to one gallon or spread it out over several. By increasing the amount of tin, you will also increase the effectiveness of the antifouling. Do not add more than one 8-ounce container per gallon. Tin Booster can be used on outdrives or running gear. Simply apply product with brush, roller, or spray and wait overnight before putting it in the water. Precautionary Statements Be sure to wear protective gloves, and goggles when using this or any other antifouling. Proper ventilation and respirators are imperative. Mixing Instructions Mix desired amount of Tin Booster to your paint. Do not mix with non-tin based paints. It could cause the paint to gel. After adding Tin Booster, mix with a heavy-duty mechanical shaker or by shaking can vigorously for about 3 minutes. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com
カタログの1ページ目を開くSea Hawkのすべてのカタログとパンフレット
-
BIOCOP TF3 ページ
-
TROPIKOTE EX3 ページ
-
Islands 99 plus2 ページ
-
2019 CUKOTE 330 VOC3 ページ
-
R14 ページ
-
Tropikote™3 ページ
-
Vinyl Ester Resin3 ページ
-
2018 CUKOTE 330 VOC3 ページ
-
Islands 44 TF™3 ページ
-
AF-332 ページ
-
Cukote2 ページ
-
Mission Bay2 ページ
-
Gel Coat2 ページ
-
Hawk Epoxy BROCHURE4 ページ
-
S-901 ページ
-
Silver Bullet?2 ページ
-
Black Barrier Coat2 ページ
-
sHAWKocon?2 ページ
-
S-762 ページ
-
S-75 and S-75C2 ページ
-
Tuff Stuff3 ページ
-
Hawk Epoxy RESIN4 ページ
-
Hawk Filler2 ページ
-
Aluma Hawk2 ページ
-
BiocopTF3 ページ
-
Non-Sanding Primer2 ページ
-
Island Prime Sealer2 ページ
-
Hawks Grip2 ページ
-
Barrier Coat Primer2 ページ
-
Bio-Boost1 ページ
-
Cukote Biocide2 ページ
カタログアーカイブ
-
Brochure20 ページ
