
カタログの抜粋

SMART SOLUTION™ Revision date: April 2019 Technical Data Sheet Metal-Free Advanced Technology Environmentally-Friendlier Antifouling • No Bioaccumulation in Environment • Slick Film Increases Speed When Launched • Compatible with Most Antifoulants • Metal-Free Bottom Paint PRODUCT DESCRIPTION Smart Solution is the next generation in antifouling technology and is engineered to be the most effective environmentally friendly antifouling PRODUCT INFORMATION Colors: Black 4705, Bright Blue 4702, Dark Blue 4730, Bright Red 4701, Bright Green 4703, White 4710, Light Gray 4731 (Available in quarts and pints) Finish/Sheen: Semi-gloss paint available. Smart Solution provides equivalent performance to traditional antifoulants, but utilizes encapsulates the hull, providing Shipping Weight: Black - 10.46 Lbs/Gal (4.74 kg/Gal) Bright Blue - 10.10 Lbs/Gal (4.58 kg/Gal) Dark Blue - 9.98 Lbs/Gal (4.52 kg/Gal) Bright Red - 9.85 Lbs/Gal (4.51 kg/Gal) Bright Green - 10.02 (4.54 kg/Gal) White - 11.29 Lbs/Gal (5.12 kg/Gal) Light Gray - 10.38 Lbs/Gal (4.70 kg/Gal) enhanced speed and premium Typical Shelf Life: 2-3 years performance against growth. completely METAL-FREE biocides resulting in no bioaccumulation in the environment. The coating’s reaction to salt water creates a slick film that VOC: 328 Grams/Liter Typical Film Thickness: Pleasure craft: 3.78 mils (96.01 µ) dry film thickness (DFT) per coat, (6.0 mils (152.4 µ) wet film thickness (WFT)) Commercial Marine: 3.78-5.0 mils (96.01-127 µ) dry film thickness (DFT) per coat by spray application, (6.3-8.0 mils (160.02-203.2 µ) wet film thickness(WFT)) Recommended Coats: 3 Theoretical Coverage: 267 sq.ft./gal. (24.8 m2/gal) at 3.78 mils (96.01 µ) dry film thickness FEATURES & BENEFITS • Environmentally-friendly metal free bottom paint • Slick film created when launched • Copper-free (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.
カタログの1ページ目を開く
SMART SOLUTION™ Technical Data Sheet • Compatible over existing antifoulants surface penetration. Next, apply whatever seam compound if needed, allow to dry in accordance with the product label and apply 3 coats of Smart Solution without any Thinner reduction. • Increased speed APPLICATION DETAILS Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Pleasure Craft (Drying time in hours): Substrate Temp. Minimum Recoat Minimum Launch Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry...
カタログの2ページ目を開く
SMART SOLUTION™ Technical Data Sheet APPLICATION DATA Mixing: Smart Solution antifouling paint contains a moderate concentration of biocide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. Induction Time: Not Applicable Thinning: If necessary, maximum 10% Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene Pot Life: Not Applicable Brush/Rolling: Solvent Resistant Roller Cover 3/8” pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; 0.017”-0.026”...
カタログの3ページ目を開くSea Hawkのすべてのカタログとパンフレット
-
BIOCOP TF
3 ページ
-
TROPIKOTE EX
3 ページ
-
Islands 99 plus
2 ページ
-
2019 CUKOTE 330 VOC
3 ページ
-
R1
4 ページ
-
Tropikote™
3 ページ
-
Vinyl Ester Resin
3 ページ
-
2018 CUKOTE 330 VOC
3 ページ
-
Islands 44 TF™
3 ページ
-
AF-33
2 ページ
-
Cukote
2 ページ
-
Mission Bay
2 ページ
-
Gel Coat
2 ページ
-
Hawk Epoxy BROCHURE
4 ページ
-
S-90
1 ページ
-
Silver Bullet?
2 ページ
-
Black Barrier Coat
2 ページ
-
sHAWKocon?
2 ページ
-
S-76
2 ページ
-
S-75 and S-75C
2 ページ
-
Tuff Stuff
3 ページ
-
Hawk Epoxy RESIN
4 ページ
-
Hawk Filler
2 ページ
-
Aluma Hawk
2 ページ
-
BiocopTF
3 ページ
-
Non-Sanding Primer
2 ページ
-
Island Prime Sealer
2 ページ
-
Hawks Grip
2 ページ
-
Barrier Coat Primer
2 ページ
-
Tin Booster
1 ページ
-
Bio-Boost
1 ページ
-
Cukote Biocide
2 ページ
カタログアーカイブ
-
Brochure
20 ページ