カタログ >
Sea Hawk >
Mission Bay CSF Self-Polishing Nano-Based Technology

Mission Bay CSF Self-Polishing Nano-Based Technology
1 / 2ページ

カタログの抜粋

Mission Bay CSF Self-Polishing Nano-Based Technology - 1

PREMIUM YACHT FINISHES Nano-Based Technology Copper-Free, Solvent-Free and Tin-Free Environmentally Friendly UV Reactive Biocide Mission Bay CSF Self-Polishing Nano-Based Technology 4500 Series Product Description Copper and Solvent-Free (CSF) ablative, self-polishing antifou-lant. Enhanced, Nano-Based Technology copolymer, biocide release mechanism. Prevents coating buildup and reacts with UV light. Mission Bay may be used on aluminum hulls without the use of a traditional barrier coat system. Product Information Colors: Red 4501, Blue 4502, Green 4503 Benefits VS. Competition • Over 80% Lower VOC's than Solvent-Based Paint • Safe for Aluminum Hulls • More Vibrant Colors • No Mud Cracking • May Be Applied Over Other Ablative Antifoulant Paints (See Compatibility Chart) Finish/Sheen: Converter: Copper Content: Voume Solids: Solids by Weight: Mix Ratio: Shipping Weight: Flash Point: VOC: Film Thickness: Recommended Coats: Theoretical Coverage: Semi-Gloss One Pack 0% All Colors 55% (±2%) 65% One Pack 14-15 Lbs./Gal. N/A 150 Grams/Liter 5 mils wet equals 2.75 dry per coat 3 Full Coats on Entire Hull 320 Sq.Ft./recommended film thickness Application Details Method: Brush, Roller or Spray Induction Time: Not Applicable Thinner: Water Cleaner: Water Pot Life: Not Applicable Overcoating Interval Drying time in Hours Substrate Temp. Touch Min. Max. Launch Consult your Sea Hawk Representative for the system best suited for surfaces to be protected.

カタログの1ページ目を開く

Mission Bay CSF Self-Polishing Nano-Based Technology - 2

Sea Hawk PREMIUM YACHT FINISHES Mission Bay CSF Self-Polishing Nano-Based Technology 4500 Series APPLICATION Apply by brush, roller or spray. Apply 5 mils wet, which will yield 2.75 mils dry per coat. Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1 -2 GPM ratio pump; "0.0170.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Thinning If thinning is necessary, thin up to a maximum of 10%, with water. Cleanup Clean all...

カタログの2ページ目を開く