カタログ >
Sea Hawk >
Marine Paint Stripper

Marine Paint Stripper
1 / 2ページ

カタログの抜粋

PAINT STRIPPER Marine Paint Stripper Use on Bottom or Topside Paints Product Description Sea Hawk Marine Paint Stripper is a newly developed, superior and safer type of marine paint remover. It removes multiple layers of marine antifouling and topside coatings as well as traditional paints and varnishes. Sea Hawk Marine Paint Stripper will not damage gel coat or fiberglass. It does not pit or corrode aluminum or other metals. Sea Hawk Marine Paint Stripper is safe for all wood surfaces as well. This environmentally safe formula is biodegradable, nonflammable, low odor, and has no methylene chloride or other harsh solvents. It does not require neutralization and the thick paste will cling to all surfaces. Sea Hawk Marine Paint Stripper will stay moist and active for up to 24 hours or more for most applications. It may be applied by brush, roller, or sprayer. Sea Hawk Marine Paint Stripper can be applied to most interior and exterior surfaces including fiberglass, metals (including aluminum), wood (including hardwoods - it does not raise or darken the grain). Sea Hawk Marine Paint Stripper is also safe to use on brick, stone, concrete, marble, finely detailed cabinetry, as well as plaster and wood moldings. Do not use on rubber, lino- Will not damage gel coat or fiberglass Does not pit or corrode aluminum or other met- Safe on all wood surfaces Coatings Removed Sea Hawk Marine Paint Stripper will remove many types of marine paints and varnishes including copper based antifouling, enamels, teak oil finish, urethanes, rubber based deck paints, latex, lacquers, etc. Preparation Be certain to cover any area not being stripped with a plastic drop cloth and masking tape. Take extra precautions when spraying to control overspray from getting on adjoining surfaces. IMPORTANT: To determine acceptability, before using Sea Hawk Marine Paint Stripper, be certain to do a TEST PATCH AREA of the surface to be stripped. Apply Sea Hawk Marine Paint Stripper with a brush at 3 different thicknesses between 15 and 30 mils. Periodically test these areas for the correct dwell time for removal over a 1/2 to 6 hour period and longer if very heavily coated. The more coats of paint the longer it will need to dwell. Sea Hawk Marine Paint Stripper will stay wet and active during the entire test period. Some coatings, like moisture cures and two-part urethanes, will take longer to thoroughly soften. Sea Hawk Marine Paint Stripper will stay wet and active for 24 hours or more. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

カタログの1ページ目を開く

PAINT STRIPPER Biodegradable 1280 Cleanup Cleanup all areas with soap and water. Best results with Sea Hawk Marine Paint Stripper will be achieved when used at temperatures between 60°F and 80°F. Allow more time before removing paint for temperatures below 60°. When working in very windy, hot, dry, or direct sunlight, keep Sea Hawk Marine Paint Stripper from drying out prematurely by misting the entire covered surface periodically with fresh water. Coverage Minimum 50 to 75 square feet per gallon at 30 mils (approximately 1/32”) thickness. When applied in thinner coats (at least 10-15 mils)...

カタログの2ページ目を開く