カタログ >
Sea Hawk >
Islands 77 Plus™ Technical Data Sheet_2019

Islands 77 Plus™ Technical Data Sheet_2019
1 / 3ページ

カタログの抜粋

Islands 77 Plus™ Technical Data Sheet_2019 - 1

Revision date: April 2019 Technical Data Sheet Advanced Dual Biocide TBT-Free Maximum Performance for All Vessels • Advanced dual biocide PL3 release technology • Maximum protection available • 38.06% Cuprous Oxide • Multi-season protection • TBT-Free PRODUCT DESCRIPTION Islands 77 Plus was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system “PL3” produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. PRODUCT INFORMATION Colors: Black, Blue, Dark Blue, Red, Green Finish/Sheen: Semi-Gloss Biocide Content: 4.14% Copper Content: 38.06% (all Colors) Volume Solids: 57% (±2) Solids by Weight: 80% (±2) Shipping Weight: Black - 15.76 Lbs/Gal (7.15 kg/Gal) Blue - 15.76 Lbs/Gal (7.15 kg/Gal) Red - 15.76 Lbs/Gal (7.15 kg/Gal) Dark Blue - 16.0 Lbs/Gal (7.257 kg/Gal) Green - 15.76 Lbs/Gal (7.15 kg/Gal) *All colors are not available in all states Flash Point: 100° F/38° C VOC: 377 Grams/Liter Typical Film Thickness: Pleasure craft: 3.0 mils (76.2 µ) dry film thickness(DFT) per coat, (5.3 mils (134.62 µ) wet film thickness(WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 3.0 mils (76.2 µ) dry film thickness (DFT) per coat, (5.3 mils (134.62 µ) wet film thickness (WFT)), 2 coats on entire hull. Commercial Marine: 4.0-5.0 mils (101.6-127 µ) DFT per coat by spray application (7.0-8.8 mils (177.8-223.52 µ) WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas. Theoretical Coverage: 315 Sq.Ft./Gal. (29.2645 m2) @ 2.9 mils (73.66 µ) DFT. FEATURES & BENEFITS • Advanced Dual Biocide PL3 Release Technology for Longer Life • Harder, Self-Polishing Polymer Binding System (Page 1 of 3) NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX

カタログの1ページ目を開く

Islands 77 Plus™ Technical Data Sheet_2019 - 2

Islands 77 Plus™ Technical Data Sheet • Highest Grade of Cuprous Oxide Available • Better Color Consistency for Color Matching • Provides Maximum Fouling Protection as TBT Type Products • TBT-Free APPLICATION CONTROLS Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes. Dry Times and Overcoating Intervals: Substrate Temp. Overcoating Time Please contact your Sea Hawk representative for Commercial Marine application and overcoating dry times. SURFACE PREPARATION Paint only clean, dry surfaces. Remove all grease, oil, wax, or other...

カタログの2ページ目を開く

Islands 77 Plus™ Technical Data Sheet_2019 - 3

Islands 77 Plus™ Technical Data Sheet Induction Time: Not Applicable Thinning: If necessary, maximum 10% with Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene Pot Life: Not Applicable Brush/Rolling: Solvent Resistant Roller Cover 3/8” (10 mm) pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; “0.017-0.026” (0.43-0.66 mm) orifice tip; 3/8” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Conventional Spray: Please contact your Sea Hawk representative for more specific information....

カタログの3ページ目を開く