カタログ >
Sea Hawk >
Black Barrier Coat

Black Barrier Coat
1 / 2ページ

カタログの抜粋

The Best Primer for Aluminum and Steel Coal Tar Epoxy Primer Product Description A two component high build Coal Tar Epoxy for use on properly prepared steel, aluminum, galvanized and concrete substrates. Extremely High Build Epoxy for Maximum Protection Provides heavy-duty protection for exposures in marine (ship hulls, tanks, pilings, etc.) petroleum, (refinery tanks, piping, offshore structures, etc.) water and water treatment. Black Barrier Coat meets or exceeds all requirements of the Corp. of Engineers Specification C-200, Government Specification MIL-P 23236 and Steel Structures Paint System SSPC Paint 16-68T. Part of the Sea Hawk Aluminum Barrier Coat System Preferred by Mega Yachts Application Details Product Information Colors: Copper Content: Voume Solids: Brush, Roller or Spray Induction Time: Overcoating Interval Drying time in Hours Shipping Weight: Substrate Temp. Flash Point: Film Thickness: 12 mils wet equals 8 mils dry per coat; can be applied at 20-30 mils wet to obtain 14-20 mils dry when applied with airless sprayer Recommended Coats: 4-6 Hours 2-4 Hours 1-2 Hours Minimum Launch Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. Theoretical Coverage: 140 Sq.Ft./Gl @ recommended film thickness NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 www.SeaHawkPaints.com

カタログの1ページ目を開く

1255 Black Barrier APPLICATION Coal Tar Epoxy Primer Apply by brush, roller or spray. Application by brush or roller my require more than one coat. Where two coats are required, apply second coat as soon as first coat is firm. Maximum recoat time is 18 hours. If 1255 cures beyond the recoat time uniformly abrade surface to a dull golden brown by brush blasting under low pressure, or sanding with 80 grit sandpaper. Equipment Brush: China Bristle Roller: Solvent Resistant Roller Cover 3/8" pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use. Airless Spray: Minimum...

カタログの2ページ目を開く