
カタログの抜粋

Sea Hawk PREMIUM YACHT FINISHES Revision date: April 2018 Self-Polishing Premium Performance CUKOTE330VOC 3400 Series Technical Data Sheet Self-Polishing Copolymer Antifouling • Multi-season performance • Removing boat from water does not affect antifouling properties • 47.5% cuprous oxide • Lloyd’s Register certified PRODUCT DESCRIPTION CUKOTE 330 Grams/Liter VOC is a top-performing antifouling coating, even in the most severe fouling areas, and preserves air quality with its Low VOC emissions during application. Its unique ablative, self-polishing properties keeps boat hull's underwater surfaces smooth and clean with no buildup of bottom paint over time. Effective below the waterline on fiberglass, steel and wood vessels, CUKOTE 330 Grams/Liter VOC provides multi-season antifouling protection with its advanced formulation allowing vessels to be removed from the water without compromising its PRODUCT INFORMATION Colors Available: Black 3445-L, Red 3441-L, Blue 3442-L, Dark Blue 3430-L, Teal 3434-L Finish/Sheen: Semi-Gloss Converter: One Pack Copper Content: 47.57% All Colors Solids by Weight: 81% (±2%) Volume Solids: 54% (±2%) Mix Ratio: One Pack Shipping Weight: Black - 18.3 Lbs/Gal Blue - 18.2 LbsGal Red - 18.8 Lbs/Gal Dark Blue - 18.0 Lbs/Gal Teal - 18.1 Lbs/Gal *All colors are not available in all states Flash Point: 100°F VOC: 330 Grams/Liter Typical Film Thickness: Pleasure craft: 2.5 mils dry film thickness(DFT) per coat, (4.6 mils wet film thickness(WTF)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas Pleasure craft (California/Reduced CU2O Leach Rate Application): 2.5 mils dry film thickness (DFT) per coat, (4.6 mils wet film thickness (WTF)), 2 coats on entire hull Commercial Marine: 4.0-5.0 mils DFT per coat by spray application (7.4-9.3 mils WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas Theoretical Coverage: 173 Sq.Ft. at 5.0 mils DFT, 346 Sq. Ft. at 2.5 mils FEATURES AND BENEFITS • Self Polishing Ablative with Multi-Season Performance on Both Pleasure Craft, Coastal and Deep Sea Vessels • Harder Ablative Finish Makes CUKOTE 330 Grams/Liter VOC Ideal for Fast Moving Vessels including: Pleasure Craft Power Boats, High Speed Transports, Supply Vessels, and Ferries • May Be Taken In and Out of the Water Without Affecting Antifouling Characteristics • Does Not Contain Any Organotin Compounds (TBT) • May Be Used on All Steel, Fiberglass, and Wood Vessels Below the Waterline That Have Been Planned Dry Dockings of Less Than Three Years NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.c
カタログの1ページ目を開く
Sea Hawk PREMIUM YACHT FINISHES CUKOTE330VOC 3400 Series Technical Data Sheet APPLICATION DETAILS Method: Airless and Conventional Spray, Solvent Resistant Rollers and Brushes. Dry Times and Overcoating Intervals: Pleasure Craft Drying time in Hours (on reverse side) Consult your Sea Hawk Representative for the system best suited for surfaces to be protected. LIMITATIONS Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 5°F (1°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C)...
カタログの2ページ目を開く
Sea Hawk PREMIUM YACHT FINISHES CUKOTE330VOC 3400 Series Technical Data Sheet SAFETY Prior to use, obtain and consult the "Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary notices on container labels. NEW NAUTICAL COATINGS, INC. 14805 49th Street North • Clearwater, FL 33762 • 727.523.8053 • 800.528.0997 • FAX 727.523.7325 • www.SeaHawkPaints.com
カタログの3ページ目を開くSea Hawkのすべてのカタログとパンフレット
-
BIOCOP TF
3 ページ
-
TROPIKOTE EX
3 ページ
-
Islands 99 plus
2 ページ
-
2019 CUKOTE 330 VOC
3 ページ
-
R1
4 ページ
-
Tropikote™
3 ページ
-
Vinyl Ester Resin
3 ページ
-
Islands 44 TF™
3 ページ
-
AF-33
2 ページ
-
Cukote
2 ページ
-
Mission Bay
2 ページ
-
Gel Coat
2 ページ
-
Hawk Epoxy BROCHURE
4 ページ
-
S-90
1 ページ
-
Silver Bullet?
2 ページ
-
Black Barrier Coat
2 ページ
-
sHAWKocon?
2 ページ
-
S-76
2 ページ
-
S-75 and S-75C
2 ページ
-
Tuff Stuff
3 ページ
-
Hawk Epoxy RESIN
4 ページ
-
Hawk Filler
2 ページ
-
Aluma Hawk
2 ページ
-
BiocopTF
3 ページ
-
Non-Sanding Primer
2 ページ
-
Island Prime Sealer
2 ページ
-
Hawks Grip
2 ページ
-
Barrier Coat Primer
2 ページ
-
Tin Booster
1 ページ
-
Bio-Boost
1 ページ
-
Cukote Biocide
2 ページ
カタログアーカイブ
-
Brochure
20 ページ