カタログ >
RESOLTECH >
RESOLTECH 3200

RESOLTECH 3200
1 / 4ページ

カタログの抜粋

Hardener 3205 Thinner DIL 3020 Highly UV resistant acrylic varnish - Non yellowing - Compatible with Resoltech’s epoxy resins - Resistant to outdoor conditions - Transparent and glossy finish - Spray gun application

カタログの1ページ目を開く

INTRODUCTION 3200/3205 system is an non yellowing transparent acrylic varnish especially formulated to protect Resoltech’s epoxy resins. As a finish coat, it will protect epoxy parts from bleaching and yellowing caused by sunlight and outdoor conditions. This product is highly recommanded for furnitures (river tables), composite parts (carbon look), naval furnitures, sculptures, paints, jewels... It is compatible with all Resoltech’s epoxy resins, after diluting with DIL 3020 thinner, it can be applied with all kind of spray guns. Resistant to hydrolysis and to most common domestic...

カタログの2ページ目を開く

PHYSICAL CHARACTERISTICS Visual aspect Clear viscous liquid Clear liquid Clear liquid Abrasion resistance Mass loss over 1000 cycles Conducted on TABER 5155 ABRASSER Dual Rotatory at 20°C, load : 1 Kg, abrasive : CS : 17, speed 60 rpm After 7 days of hardening at 23°C DRYING AND HARDENING Systems

カタログの3ページ目を開く

HEALTH & SAFETY Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek medical attention. Ensure adequate ventilation in work areas. Respiratory protection should be worn with ABEKP coded filters. Resoltech issues full Material Safety Data Sheet for all TRANSPORT & STORAGE hazardous products. Please ensure that you have the correct MSDS to hand for the...

カタログの4ページ目を開く