3100
1 / 5ページ

カタログの抜粋

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 resoltech * ADVANCED TECHNOLOGY RESINS RESOLTECH 3100 Hardener 3102 ■ Structural toughened epoxy high peel resistance adhesive for demanding applications ■ Room temperature curing ■ Excellent impact damage resistance RESOLTECH 3100 / 3102 epoxy adhesive is a rubber toughened, high performance adhesive that will enable bonding with very high mechanical resistance and high peel-resistance. Its room temperature cure makes this epoxy adhesive an easy product to work with. It will enables structural bondings of all types of composite materials, steel, aluminium, and will resist in a large range of operating temperatures from -50°C to +80°C, with a maximum service temperature of 120°C and very good resistance to thermal shocks. It is a solvent less adhesive with no contraction upon curing. RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

カタログの1ページ目を開く

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

カタログの2ページ目を開く

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 The standard procedure of working with epoxy systems applies to the RESOLTECH 3100 / 3102 : ■ Mixing the resin and hardener should be done above 5 °C. ■ It is recommended to proceed to a small test before industrial size application. ■ It is recommended to deglaze, clean and degrease the support prior to application. RESOLTECH 3100 / 3102 is a room temperature cure adhesive formulated for a large range of bonding applications and will provide superior adherence onto composites, steel & aluminium. It is suitable for core...

カタログの3ページ目を開く

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 Flexural properties according to ISO 178 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

カタログの4ページ目を開く

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 PACKAGING 3100 / 3102 kits available : ■ (1+0.2) kg Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date stated on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding...

カタログの5ページ目を開く