カタログ >
Poly-Planar >
ME-60 Marine Amplifier

ME-60 Marine Amplifier
1 / 1ページ

カタログの抜粋

ME-60 Marine Amplifier The ME60 is a four channel 120 Watts RMS audio amplifier of delivering up to 30W RMS per channel. It has a compact, water resistant design that allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for any installation. Uses: • To add additional loudspeakers to a current audio system • To provide amplification for a separate audio zone • As a stand-alone system amplifier for any audio source • To power standard speakers or speakers and subwoofer Features: • Powers up to (8) 4ohm speakers • Internal distortion limiting circuits • Dedicated gain level control • External volume control with ON/OFF switch included • Water resistant design for marine use • Rear channels switchable from full range to powered sub out. Specifications: • Speaker Impedance- ------------------------------------ 2-8 ohm • Output Power- ---------------------------------------------------------(2 ohm load) 30 Watts RMS per Channel (70W Peak) (4 ohm load) 20 Watts RMS per Channel (50W Peak) • Frequency Response------------------------------ 20Hz-40kHz • Low Pass Crossover-------------------------------- 18 - 245 Hz • Operating Voltage----------------------13.8V DC (10V-16V) • Maximum Current Draw (full power)--------- 8-10amps • Dimensions (approx. w x h x d)---- 175mm x 115mm x 35mm 6.9” x 4.5” x 1.4” • Installation Clearance--------- 250mm free space top/sides • Weight--------------------------------------------------.68Kg /1.5lbs • Volume Control Cable Length----------------290cm/114” POLY-PLANAR • PO Box 409 • Hanover, MD 21076 • (410)761-4000 www.polyplanar.com

カタログの1ページ目を開く