カタログ >
NORIS Group GmbH >
Flyer NIQ31 - 360° Analogue indicator with stepper motor principle

Flyer NIQ31 - 360° Analogue indicator with stepper motor principle
1 / 1ページ

カタログの抜粋

Flyer NIQ31 - 360° Analogue indicator with stepper motor principle - 1

360° Analogue indicator with stepper motor principle ■■Indication of, e. g. propeller position, propeller pitch or rudder angle of ships by 360° scale ■■Bright, uniform LED scale illumination for optimum reading ■■Direct connection of all standard measuring signals ■■Compact and robust design in various sizes with glass fibre reinforced plastic casing and a high resistance against salt spray for harsh ambient conditions Benefits of analogue indication ✔✔ Optimal readability even at large distance and sharp angles, regardless of daytime or direct sunlight ✔✔ Higher life cycle compared to displays ✔✔ Direct connection wihtout the need of any additional measuring transducers ✔✔ No complex parameterization needed ✔✔ Cost advantage during the whole period of use ■■Customer-specific scales possible ■■Fulfil the requirements of all common ship classification societies Technical data (extract) Design Sizes A high resolution motor without a mechanical stop is used in 360° indicators to enable continuous rotation of the dial. As the motor in this indicator has no mechanical stop, the zero point is found by laser scanning of a position marker on the underside of the dial. Input signals Current: 0 ... 20 mA; 4 ... 20 mA; -20 ... +20 mA Voltage: 0 ... 10 VDC; 2 ... 10 VDC; -10... +10 VDC Other input signals on request Accuracy class EN 60051 and IEC 51-1: better than 0.5 % referred to the measuring range Operating temperature Protection class The gear backlash of the stepper motor is virtually eliminated by a special motor controller. This method enables pinpoint positioning accuracy of the dial in both directions. In addition the indicator corrects the gear backlash every second when the dial is stationary. The reading is corrected if it deviates from the correct value (within the gear backlash) due to an impact or vibration. NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Phone: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com FL-NIQ31-EN_V01

カタログの1ページ目を開く