Datasheet SIR3 SIQ3 - Analogue Indicator with moving-coil element
1 / 10ページ

Analogue indicator Type SIR3 (round) and Type SIQ3 (square) with moving-coil element NOR/S Construction type Scope of application Type SIR3, SIQ3 analogue indicators are commonly used in the fields of the shipbuilding industry, transport technology, machinery and equipment. They are suitable for use in harsh ambient conditions and comply with the requirements of DIN EN 50155 for railway applications and the ship classification society DNV-GL. Thanks to its mechanical design, the casing is extremely resistant to salt spray, enabling use in outdoor applications. The DIN-standardised casing sizes are suitable for installation in control cabinets and control panels with prestamped standardised installation openings. Display principle The display on the SIR3, SIQ3 is based on a 1 mA moving-coil element. The moving-coil element contains a coil that rotates in the magnetic field of a permanent magnet. When a direct current flows through the coil, a second magnetic field is produced in the opposite direction of the magnetic field of the permanent magnet. The two magnetic fields repel, thus rotating the coil with an attached pointer. A coil spring acts against the magnetic force in the coil. Special features • Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design • Individual scale design and corporate logos possible • Also available with a centred zero moving-coil element (±1 mA) • Direct connection of the current, voltage measuring signals • Complies with DNV GL certification (other certifications available on request) Datasheet DB-SIR3/SIQ3-EN | V01.05 | 25/02/2019 | Valid from product revision Rev.A | www.noris-group.com | sales@noris-group.com

NORIS Automation GmbH Indicator versions The following figures show the types and sizes of the indicators: Indicator sizes, Type SIR3 round From left to right: Type SIR3 Ø 60 mm, Ø 80 mm, Ø 100 mm, Ø 130 mm Indicator sizes, Type SIQ3 square From left to right: Type SIQ3 72x72 mm, 96x96 mm, 144x144 mm NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepte

NORIS Automation GmbH Features | Features Scale and pointer The markings and the scale graduation comply with DIN43802 and DIN43780 but can also be customised on request. DB-SIR3_SIQ3 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

NORIS Automation GmbH Standard and customised dial versions Examples of standard and customised versions of dials are illustrated below. Round design, Type SIR3 Fig. 1 YOUR LOGO Square design, Type SIQ3 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

NORIS Automation GmbH Zero point and measuring range Zero point Zero point on the left Scale measuring range • The measuring range shown on the dial (can be individually defined) and the signal measuring range (see type code) differ. Zero point in the middle • Processing of current/voltage signals (customised current/voltage measuring ranges also possible), see type code Illumination NOTICE! For technical reasons, the moving coil system casts shadows in the centre of the indicator’s scale dial for indicators with white scale dial. For indicators with black scale dial in dark rooms with...

| Dimensioned drawing, connection and wiring diagrams NORIS Automation GmbH Dimensions of round type SIR3... Indicator type DB-SIR3_SIQ3 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

NORIS Automation GmbH Dimensioned drawing, connection and wiring diagrams | Connection diagrams Free pins in the diagrams below are not connected for the respective signal type. Type -UG0: Tachogenerator GE1214, DC voltage signal Alternating voltage for tachogenerator; sinusoidal signal, 250 VAC max. Reference information for application of type series-I2 in conjunction with DIN EN 50155: For indicators type series -I2 in conjunction with DIN EN 50155 for railway application, a split ferrite must be mounted on the connection cable directly at the connector (see connection instructions in...

| Technical data NORIS Automation GmbH DB-SIR3_SIQ3 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

NORIS Automation GmbH Technical data | DB-SIR3_SIQ3 NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

| Type code NORIS Automation GmbH Ordering information • To ensure the dial design is implemented as accurately as possible, exact descriptions, drawings or photos of existing dials should accompany the order. • If the dial markings are not specified when ordering, coarse/fine scale graduations will be supplied as standard. An orientation graduation or other deviating dial markings must be specified in the order. • The dial version number and the V### number are assigned by NORIS. NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911...