カタログ >
NORIS Group GmbH >
Datasheet DWA

Datasheet DWA
1 / 4ページ

カタログの抜粋

Rotary position sensor with ohmic signal output NOR/S Measuring principle Rotary position sensor DWA Scope of application The type DWA rotary position sensors are robust, maintenance-free sensors that are particularly used in the Shipbuilding industry and machinery and plant engineering industry to convert the mechanical rotation angle of a shaft into an electrical signal (e.g. for measuring the rudder angle or adjusting the pitch). Measuring principle The instrument shaft is connected to a double sensor. Depending on requirements, the angle position that can be acquired electronically (10° ... 320° in 10° steps (linear acquisition angle)) must be selected and adjusted within a mechanical revolution (using a round bracket for mechanically adjusting a freely selectable reference position). The version with ohmic resistor connection provides a passive electrical signal. Special features • 360° rotation angle without mechanical limitation • Reference positions easy to adjust mechanically • Maintenance-free operation • No reference run necessary • Potential-separated channels Datasheet DB-DWA-EN | V01.04 | 27/06/2017 | Valid from product revision C | www.noris-group.com | sales@noris-group.com

カタログの1ページ目を開く

| Dimensioned drawing, connection and wiring diagrams NORIS Group GmbH Dimensioned drawing, connection and wiring diagrams Design DWA…-1: for terminals up to max. 4 mm2 A Design DWA…-2: with fixed connection cable A: Length 115 mm B: Length 40 mm C: Length 25 mm D: Ø 40h8 mm E: Ø 12h9 mm F: Ø 80 mm G: Length 26 mm Wiring diagram 11: R10 12: R1M 13: R11 21: R20 22: R2M 23: R21 Information on the connection diagram: Tap-off point on the voltage divider in the arrow direction when the drive shaft is rotating clockwise (looking at the shaft) Wiring diagram A: Length 73 mm B: Length 30 mm C:...

カタログの2ページ目を開く

カタログの3ページ目を開く

| Type code NORIS Group GmbH Type code structure Special types If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you. DB-DWA NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

カタログの4ページ目を開く