カタログの抜粋
Sep 2009 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au WEATHERFAST GREY PRIMER DESCRIPTION: A heavy-bodied grey Primer with fast drying and easy sanding properties. USES: For use on most bare surfaces other than those of continuous immersion. Suitable for all air dried paint systems. PROPERTIES (at 20°C) COLOUR: Mid Grey TOXICITY: See Precautions FINISH: Flat COVERAGE: 10-12sq.metres/litre DRYING TIME: Touch dry 1-2 hours at 50% relative humidity RECOATING: After 16 hours POT LIFE: N/A MIXING RATIO: N/A THINNING: Not recommended for brush or roller use. Spraying – Thin with up to 33 1/3% of Weatherfast Spraying Thinners. WEIGHT/LITRE: 1.4kg VOLUME SOLIDS: 71% FLASH POINT: 32°C CLEAN UP: Weatherfast Brushing Thinners U.N. NUMBER: 1263
カタログの1ページ目を開く
Page 2 – Weatherfast Grey Primer PREPARATION: New Timber – Sand and remove dust from the grain with clean cloths soaked in methylated spirits and allow to dry. Other substrates – Refer to appropriate NORGLASS INFORMATION GUIDES for advice. APPLICATION: Stir contents before use. Ensure that the surface is dry and free from contaminants. Apply by brush and short nap roller and allow 24 hours to dry. If spraying, wet on wet coats are possible but longer drying time may be required for all the solvent evaporation to take place. TRANSPORTATION: Dangerous goods, Class 3.2 Flammable liquid Hazchem...
カタログの2ページ目を開くNorglassのすべてのカタログとパンフレット
-
Metal-Etch Gel2 ページ
-
Northane Clear Gloss2 ページ
-
Flattening Agent2 ページ
-
polyester catalyst3 ページ
-
Glue Promoter2 ページ
-
Slip Resistant Agent3 ページ
-
Norfill epoxy filler2 ページ
-
Norflex epoxy filler2 ページ
-
Liquid Glass2 ページ
-
Norcells2 ページ
-
Microtalc2 ページ
-
metal etch gel2 ページ
-
acetone3 ページ
-
topflight anti-fouling2 ページ
-
soft copper antifouling2 ページ
-
Northane gloss2 ページ
-
weatherfast pri-coat2 ページ
-
staybond epoxy glue2 ページ
