カタログの抜粋
FLATTENING AGENT JULY 2014 PRODUCT DATA SHEET NORGLASS LABORATORIES PTY.LTD. A.B.N. 92 001 807 245 P.O. Box 312, Neutral Bay. NSW 2089 Australia 59 Moxon Road, Punchbowl NSW Ph: 61 2 9708 2200 Fax: 61 2 9796 3069 Email: norglass@bigpond.net.au www.norglass.com.au PRODUCT: FLATTENING AGENT DESCRIPTION: A white silica lightweight powder. For reducing the gloss values in gloss paints. 100g addition for a 4 litres gloss paint. 25g for 1 litre. DRYING TIME: MIXING RATIO: WEIGHT/LITRE: VOLUME SOLIDS: Compacted Density Method approx. 50grams per litre FLASH POINT: With recommended solvent for paint used
カタログの1ページ目を開く
FLATTENING AGENT PREPARATION: If being used in Northane, pour the stated amount into the base can of paint. Pour in gently in a still environment and reseal the lid tightly. Then shake the can vigorously for 30 seconds to wet the flattening agent out. Remove the lid and stir in thoroughly with a paint stirring blade until the Flattening Agent is dispersed. Then add in the hardener and stir again. Strain before the use. On single pack paints like Weatherfast, pour out 50% of the contents into another container. Pour in the flattening agent carefully into the original can and seal the lid...
カタログの2ページ目を開くNorglassのすべてのカタログとパンフレット
-
Metal-Etch Gel2 ページ
-
Northane Clear Gloss2 ページ
-
polyester catalyst3 ページ
-
Glue Promoter2 ページ
-
Slip Resistant Agent3 ページ
-
Norfill epoxy filler2 ページ
-
Norflex epoxy filler2 ページ
-
Liquid Glass2 ページ
-
Norcells2 ページ
-
Microtalc2 ページ
-
metal etch gel2 ページ
-
acetone3 ページ
-
topflight anti-fouling2 ページ
-
soft copper antifouling2 ページ
-
Northane gloss2 ページ
-
weatherfast pri-coat2 ページ
-
staybond epoxy glue2 ページ
