
カタログの抜粋

Maritime International’s ME Leg/Element fender provides a compact solution for the mounting of fenders where space is limited. The unique nature of leg fenders allow the fender’s length to be altered when maximum fender system standoff values may limit the use of cone or cell fenders. ME leg fenders can be mounted behind panels or piles. They can also be supplied with a UHMWPE shield providing a low cost alternative to an arch type fender and with much less space required. Type: Element Nominal Deflection: 57.5% Buckling Deflection: 30% Max Deflection: 60% E to R ratio: Medium Durability: Medium Special Design Comments: • Unless supported by a piling system or some other structural member leg fenders are required to be installed as symmetrical pairs or with three or more legs supporting the panel. • Performance listed is for a single leg. • ME leg fenders are required to be tested using the decreasing velocity method to achieve published performance values. • Common lengths include 900, 1000, 1500, and 2000 mm. Alternate fender lengths can also be provided upon request. Deflection Characteristics: © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの1ページ目を開く
Weight based on lOOOmm length HABCWDK E Bolt Size Weight Reaction bnergy ME Performance Curve Performance based on lOOOmm length © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの2ページ目を開く
ME Performance - Metric Units Grade Performance based on 1000mm length ME 550 © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの3ページ目を開く
ME Performance - Imperial Units Grade Performance based on 1000mm length © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの4ページ目を開く
© 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの5ページ目を開く
© 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
カタログの6ページ目を開くMaritime Internationalのすべてのカタログとパンフレット
-
UHMW-PE
2 ページ
-
Laminated Fenders
4 ページ
-
HSF SHEAR FENDERS
1 ページ
-
Maritime Profile fenders
16 ページ
-
Naval Products Division
28 ページ
-
AD Arch fender
6 ページ
-
MCS Cell fenders
6 ページ
-
MCN cone fender
6 ページ
-
Legacy Bollards
8 ページ
-
Staghorn Bollards
4 ページ
-
Kidney Bollards
4 ページ
-
T-Head Bollards
4 ページ
-
Double Bitt Bollards
4 ページ
-
Single Bitt Bollards
4 ページ
-
Shear Fenders
1 ページ
-
Wing Fenders
1 ページ
-
Square Fenders
1 ページ
-
D Fenders
1 ページ
-
Cylindrical Fenders
1 ページ
-
Mooring Bollards Catalog
30 ページ
-
MARINE FENDERS Catalogue
17 ページ
カタログアーカイブ
-
UHMW
1 ページ
-
AD ARCH FENDERS
4 ページ
-
Leg Fenders
4 ページ
-
MCS Cell Fender
4 ページ
-
MCN CONE FENDERS
4 ページ