ATEX IIC
1 / 8ページ

{{requestButtons}}

カタログの抜粋

ATEX IIC - 1

Motors for Hazardous Areas D5, D6 SERIES II 2G Ex d/de IIC

カタログの1ページ目を開く
ATEX IIC - 2

This catalogue refers to ATEX Motors belonging to Group II Category 2G as described. STANDARDS The ATEX Motors described in this catalogue are manufactured in accordance with IEC 60034-1-5-6-7-8-9-12-14, IEC 60072-1, EN 50347, EN 600790-1-7. Approved by SABS (South Africa Bureau Standards) and Gost R (Russia). EUROPEAN DIRECTIVES Title Equipment and protective system intended for use in potentially explosive atmospheres (ATEX) Electromagnetic Compatibility (EMC) Low Voltage Directive (LVD) Machinery Directive (MD) CERTIFICATES Frame size Temperature Limits BVI 08 ATEX 0001 CESI 03 ATEX 134...

カタログの2ページ目を開く
ATEX IIC - 3

BEARINGS Motors up to frame size 132 are normally fitted with pre-lubricated ball bearings. Motors from frame size 160 and above are fitted with regreasable bearings. Frame Size (mm) TERMINAL BOX AND CABLE ENTRY The terminal box is located on top of the motor (referred to a B3 mounting) for all sizes from 71 to 315, usually equipped with 6 terminals, and it can be rotated by steps of 90° (from size 90). For 71 ÷ 80 frame size the cable entry is on the right side of the motor (seem from the D side). Frame Size (mm) Threaded terminals Cable entries for Main Connection Cable entries for...

カタログの3ページ目を開く
ATEX IIC - 4

All rated values refer to: Ambient Temperature 40°C, Installation 1000 m a.s.l, Insulation cl. F, duty S1. PERFORMANCE AT RATED OUTPUT RATED OUTPUT MOTOR TYPE RATED CURRENT FRAME SIZE PERFORMANCE AT RATED VOLTAGE POWER FACTOR RATED TORQUE STARTING CURRENT STARTING TORQUE BREAKDOWN TORQUE Is = Starting current, Ts = Starting torque, TMAX = Breakdown torque. Detailed data for 440V/60Hz on request. Higher output available for Temperature Class T3 and/or Maximum Surface Temperature T150°C. Motor not multivoltage. Output values at 440V/60Hz refer to motors with dedicated winding. FRAME SIZE

カタログの4ページ目を開く
ATEX IIC - 5

All rated values refer to: Ambient Temperature 40°C, Installation 1000 m a.s.l, Insulation cl. F, duty S1. PERFORMANCE AT RATED OUTPUT RATED OUTPUT MOTOR TYPE RATED CURRENT FRAME SIZE PERFORMANCE AT RATED VOLTAGE POWER FACTOR STARTING CURRENT STARTING TORQUE BREAKDOWN TORQUE RATED TORQUE Is = Starting current, Ts = Starting torque, TMAX = Breakdown torque. Detailed data for 440V/60Hz on request. Higher output available for Temperature Class T3 and/or Maximum Surface Temperature T150°C. Motor not multivoltage. Output values at 440V/60Hz refer to motors with dedicated winding. B5 FLANGE B14 L...

カタログの5ページ目を開く
ATEX IIC - 6

All rated values refer to: Ambient Temperature 40°C, Installation 1000 m a.s.l, Insulation cl. F, duty S1. PERFORMANCE AT RATED OUTPUT RATED OUTPUT MOTOR TYPE FRAME SIZE PERFORMANCE AT RATED VOLTAGE POWER FACTOR RATED CURRENT RATED TORQUE STARTING CURRENT STARTING TORQUE BREAKDOWN TORQUE Is = Starting current, Ts = Starting torque, TMAX = Breakdown torque. Detailed data for 440V/60Hz on request. Higher output available for Temperature Class T3 and/or Maximum Surface Temperature T150°C. Motor not multivoltage. Output values at 440V/60Hz refer to motors with dedicated winding. DIMENSIONS...

カタログの6ページ目を開く
ATEX IIC - 7

All rated values refer to: Ambient Temperature 40°C, Installation 1000 m a.s.l, Insulation cl. F, duty S1. PERFORMANCE AT RATED OUTPUT RATED OUTPUT MOTOR TYPE RATED CURRENT FRAME SIZE PERFORMANCE AT RATED VOLTAGE POWER FACTOR RATED TORQUE STARTING CURRENT STARTING TORQUE BREAKDOWN TORQUE Is = Starting current, Ts = Starting torque, TMAX = Breakdown torque. Detailed data for 440V/60Hz on request. Higher output available for Temperature Class T3 and/or Maximum Surface Temperature T150°C. Motor not multivoltage. Output values at 440V/60Hz refer to motors with dedicated winding. SHAFT EXTENSION...

カタログの7ページ目を開く
ATEX IIC - 8

Manufacturing Plant Manufacturing Plant Arzignano - Italy Shah Alam - Malaysia OVERSEAS COMPANIES ASIA PACIFIC CENTRAL EUROPE GREAT BRITAIN Via Sabbionara, 1 36071 Arzignano (VI) - Italy (T) +39 0444 479.711 (F) +39 0444 479.888 www.marellimotori.com sales@marellimotori.com Marelli Asia Pacic Sdn Bhd Marelli Manufacturing Asia Sdn Bhd Marelli Central Europe Gmbh SOUTH AFRICA Marelli Electrical Machines South Africa (Pty) Ltd Representative Ofce Unit 4, 55 Activia Rd - Activia Park Elandsfontein, 1406 Gauteng Republic of South Africa (T) +27 11 822 5566 (F) +27 11 828 8089...

カタログの8ページ目を開く

Marelli Motoriのすべてのカタログとパンフレット

  1. Hydropower

    50 ページ

  2. Cogeneration

    49 ページ

  3. Power generation

    60 ページ

  4. Marine applications

    74 ページ

  5. Company profile

    15 ページ

  6. Marine applications

    77 ページ

  7. ATEX IIB

    8 ページ

カタログアーカイブ