カタログ >
Linak >
linear actuator la35 MODBUS

linear actuator la35 MODBUS
1 / 2ページ

カタログの抜粋

P R O D U C T D ATA S H E E T ACTUATORS LA36 AND LA35 WITH EMBEDDED MODBUS RTU INTERFACE Features: • Communicates with all common PLC´s with MODBUS modul • Less cable length due to BUS topology • Everything integrated into the actuator housing • Well tested limit switches and HALL effect feedback device • Electronic overload protection prevents damaging of components • Lowering of the maximum actuator speed is possible • Featuring Soft-start / Soft-stop which reduces mechanical stress • Programmable target positions • One scalable solution for all different sizes of installations going from single-trackers to a kers multi-tracker string and to multi-string PV parks ing with the most complex topology architectures chitectures • Less cable length due to BUS topology gy • Less number of wires and I/O’s due to BUS system • Reduced installation time due to less cabling s and programming • Ease of commissioning through BUS system • Less installed power supplies due to sequential actuator movement • Easy integration with various SCADA A systems through its BUS interface • Integrated “diagnostics” to do preventive maintenance (e.g. current consumption, number of cycles, max. current etc.) • Remote monitoring of the installation by use of an Ethernet-BUS gateway • Featuring low power mode • Maintenance-free solution • Accurate positioning of your solar panels or mirrors • Configuration software tool is available, for setting up the actuator. This RS485 MODBUS RTU option is a serial communication interface between the Actuators and a control system, the MODBUS RTU option is based on existing PCB outlines from the LA35 and LA36 actuators from LINAK, which means that all the mechanics, features and specifications that we know from LA35 and LA36 remain untouched. This MODBUS interface can communicate with a PLC with a MODBUS module.

カタログの1ページ目を開く

Copyright © LINAK 2012.08 . MA M9-02-356-B For connection diagrams ect. - please see the installation guide. Terms of use The user is responsible for determining the suitability of LINAK products for specic application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best...

カタログの2ページ目を開く