Linear Actuator LA23
1 / 4ページ

p r o d u c t d ata s h e e t ACTUATOR LA23 Features: • Load in push: 2500N, 1800N, 1500N, 1200N or 900N • Load in pull: 2500N, 1800N, 1500N, 1200N or 900N • Housing colour: Grey or black • Motor: 12 V DC, 24 V DC • Stroke length: 20 - 300 mm • Built-in dimensions: 110 mm + stroke length • Nut: Guided • Built-in electrical end-stop: Yes • Exchangeable cable: Yes • Static safety factor: 2.5 • Noise level: Max. 58.5 dB(A), (At nominal voltage and with no load, according to EN ISO 3743-1) • High impact strength – beneficial when used according to: ISO 7176-8 (Impact test) and 7176-19 (Crash test) • Mechanical end stop: Yes • Integrated intelligent control: Yes Options: • Protection class: IPX4, IPX6 or IP66 dynamic • Positioning options: Hall, potential free end stop signals or Hall potentiometer • Back fixture material: Plastic or steel • Safety nut: In push or pull (2500N and 1800N version only safety nut in push) • Mechanical spline: Yes Usage: • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Usage temperature: -30°C to +55°C (according to ISO 7176-9) • Storage temperature: -45°C to +70°C (according to ISO 7176-9) • Compatibility: Is approved and tested to run with: CB20, CB16, CB6S, CBJ1/2, CBJC and CBJH • Approvals: IEC60601-1:2005 3rd ed., ANSI / AAMI ES60601-1:2005, 3rd edition The LA23 actuator is a small and strong push or pull actuator (up to 2500 N). The LA23 can be used in various applications where size is important. Some of the benefits the LA23 offers you are: • Compact design • High lifting force • Exchangeable cables • Available with intelligent control (IC) The standard LA23 is available for both the Careline®, Medline® and Techline® product ranges. iFLEX is a descriptive term under which every TECHLINE® actuator with built-in intelligence is unified. For more information on iFLEX, please see: www.linak.com/techline

LA23 Ordering example: 23 6 1 A 0 1 0 00 250 A 4 IP degree: Motortype: 4 = IPX4 6 = IPX6 1 = IP66 Dynamic Stroke: XXX = mm Min. 020 mm, Max. 300 mIn steps of 5 mm Recommended versions: 020 mm 050 mm 100 mm 150 mm 200 mm 250 mm 300 mm Positioning: 00 = No positioning 01 = Potential free end stop signals 02 = Standard dual hall positioning 03 = Dual Hall PNP positioning xx = For more positioning - please call LINAK Safety option: 0 = No safety options (pitch 3, 5, 6, 9 or 12) 1 = Safety nut for push (pitch 3, 5, 6, 9 or 12) 2 = Safety nut for pull (pitch 6, 9 or 12) 3 = Mechanical spline...

Dimensions: Back fixture orientation Option 1 Built-in Dimensions Back fixture orientation Option 0 Tolerances: For built-in dimensions and stroke ± 2 mm. The built-in dimension depends upon the chosen safety option and stroke length. Please see the table below to decide upon the built-in dimension. Safety option Stroke length 0 = No safety option 20 - 49 1 = Safety nut for push 20 - 49 2 = Safety nut for pull 20 - 49 3 = Mechanical Spline for push 20 - 49 4 = Mechanical Spline & safety nut for push 20 - 49 0 = No safety option 50 - 200 1 = Safety nut for push 50 - 200 2 = Safety nut for...

Technical specifications: Spindle pitch (mm) Load max. Push or Pull (N) Motor type Speed at 0/ full load (mm/sec.) Current at 0/ full load (Amp.) 12VDC 3 2500 / 2500 A: 12V 3.1 / 2.3 0.6 / 3.3 CBJ1/2, CBJH and CBJC 3 2500 / 2500 B: 24V 3.2 / 2.5 0.3 / 1.8 OpenBusTM 3 2500 / 2500 G: 24V 3.2 / 2.7 0.2 / 1.2 12VDC 5 1800 / 1800 A: 12V 5.1 / 4.1 0.7 / 3.9 CBJ1/2, CBJH and CBJC 5 1800 / 1800 B: 24V 5.3 / 4.7 0.3 / 1.9 OpenBusTM 5 1800 / 1800 G: 24V 5.4 / 4.8 0.2 / 1.3 12VDC 6 1500 / 1500 A: 12V 6.2 / 4.6 0.8 / 3.6 CBJ1/2, CBJH and CBJC 6 1500 / 1500 B: 24V 6.4 / 5.5 0.3 / 1.5 OpenBusTM 6 1500 /...