

カタログの抜粋

Carbon Basalt Glas Chopped basalt fiber is a modern high-technology material which provides high strength, good mechanical properties, large thermal range of application. It is produced by cutting of continuous basalt roving into sections of required equal length. It is used as a reinforcing additive in various organic and inorganic matrices to increase the strength of the composite material. ✓ 100% natural origin ✓ ultrastrength material ✓ corrosion-resistant ✓ chemical resistance Processing and storage ✓ The usual protective measures must be taken during processing. Gloves, respiratory protection and safety glasses are recommended. Please note the instructions for use "Handling mineral wool and insulation materials (glass wool, rock wool)" from BG Bau. ✓ Storage in a dry place in original packaging, air humidity content should not exceed 80% The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage.
カタログの1ページ目を開くLifeRock Groupのすべてのカタログとパンフレット
-
Basalt roving
1 ページ
-
SeaPan WP 15/G
2 ページ
-
FirePan 50/90
1 ページ
-
CBG-Übersicht
2 ページ
-
CorePan 25/G
1 ページ
-
CorePan 15/G
1 ページ
-
SilencePan 25/G
1 ページ
-
FireCore
1 ページ
-
SeaPan WP 25/G
2 ページ
-
FirePan 25/30
1 ページ
-
Cerammatrix Carbo
1 ページ
-
Certificate Module B
2 ページ
-
LifeRock MW-180
1 ページ
-
Cerammatrix 01-50
1 ページ
-
SeaPan WP 25/G
2 ページ
-
SeaPan WP 15/G
2 ページ
-
SeaPan WP 15/15
2 ページ