Job Report : Heavy lift PDF
1 / 2ページ

{{requestButtons}}

カタログの抜粋

Job Report : Heavy lift PDF - 1

Heavy Lift Liebherr-MCCtec Rostock GmbH, Germany The MTC 78000 is one of the largest offshore slewing cranes world-wide. With a maximum dynamic torque of 78,000 mT, the MTC 78000 is the most powerful machine within the extensive range of cranes and material handling equipment offered by the Liebherr group of companies. The onsite erection and assembly of this enormous crane on the heavy load vessel OSA Goliath presented Liebherr engineers with special challenges - for example, the planning of the indivi- dual hoists so that the maximum permitted ground pressure of Two LHM 600 mobile harbour cranes were used in tandem oper- ation for the heavy duty lifts. Sycratronic® allows two LHM 600s to lift up to 416 t and to be operated simultaneously by one crane driver. Conventional, manually-operated tandem lifts with land-based cranes need to comply with international standards, resulting in load capacity down rating of 25% and more. The assembly of the MTC 78000 required several spectacular heavy duty lifts. First, the slewing platform, weighing 370 t, was mounted, thereafter, the machinery compartment with the drive components (approximately 2401), the mast lower section (about 250 t) and the mast upper section (around 160 t). The hoisting height of 43 m above pier level was made possible by equipping the mobile harbour cranes with two corresponding tower exten- Scope of supply includes Capesize / Super Post-Panamax Liebherr-Werk Nenzing GmbH

カタログの1ページ目を開く
Job Report : Heavy lift PDF - 2

Heavy Lift max. capacity 280 t The Port of Vancouver USA, is one of the major ports on the Pacific Coast located in Vancouver, Washington along the banks of the Columbia River. The Port of Vancouver has been globally recognized as a leader in handling wind power and project cargo. The port is a logistics hub for regional, national and international Port of Vancouver USA, plays a significant role in the develop- ment of wind energy in the Pacific Northwest. As wind energy car- go and project cargo began to significantly increase in volume, the port required modern cargo handling equipment to...

カタログの2ページ目を開く

Liebherr-International Deutschlandのすべてのカタログとパンフレット

  1. Special Wine 2019

    27 ページ

  2. LRS 545

    5 ページ

  3. LPS 420 E

    5 ページ

  4. Waste Management

    24 ページ

  5. Scrap Handling

    24 ページ

  6. LH 22 Industry

    40 ページ

  7. HS 8300 HD

    16 ページ

  8. HS895

    16 ページ

  9. Liebherr RL Series

    2 ページ

  10. Liebherr Electronics

    20 ページ

  11. LH 110 Port

    20 ページ

  12. LH 110 Industry

    22 ページ

  13. ER 934 C - ER 954 C

    36 ページ

  14. LH 60 M

    20 ページ

  15. LH 40/LH 50

    44 ページ

  16. LRS 645 LH

    4 ページ

  17. R 984 C

    10 ページ

  18. LH 120 M

    12 ページ

  19. LH 80 M

    16 ページ

  20. A 954 C HD

    28 ページ

  21. RTG

    2 ページ

  22. RMG

    4 ページ

カタログアーカイブ

  1. LRS 545_2015

    4 ページ

  2. LHM 280

    8 ページ

  3. LHM 600

    12 ページ

  4. LHM 120

    8 ページ

  5. LHM 500

    8 ページ

  6. LHM 400

    8 ページ

  7. LHM 320

    8 ページ

  8. LHM 180

    8 ページ

  9. LRS 645

    8 ページ