HS 8300 HD
1 / 16ページ

カタログの抜粋

Construction Machine

Dimensions Basic machine with undercarriage Operating weight The operating weight includes the basic machine with HD undercarriage, 2 main winches 500 kN including wire ropes (250 m) and 20 m main boom, consisting of A–frame, boom foot (10 m) and boom head (10 m), 78.7 t basic counterweight, 1200 mm track pads and 300 t hook block. Liebherr cable excavator HS 8008.01 Machine standing on ﬁrm, horizontal ground. The weight of the lifting device (hoist ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value. Additional equipment on boom...

カタログの2ページ目を開く

Basic machine without HD undercarriage, boom, boom backstops, A-frame, main winches (2x 500 kN), walkways and counterweight. Weight 68950 kg Basic machine with A-frame, boom backstops, main winches (2x 500 kN) without wire ropes (250 m), without walkways, HD undercarriage, boom and counterweight. Weight 99900 kg Weight winch I without wire ropes 12000 kg Weight winch II without wire ropes 12000 kg Walkway with Pactronic® (left) option Walkway with Pactronic® (right) option Standard walkway (left) Weight 670 kg Standard walkway (right) Weight Centre section...

カタログの3ページ目を開く

Boom foot (No. 2724.35) Width Weight* 2860 Boom section (No. 2724.35) Width Weight* Boom section (No. 2724.35) Width Weight* Boom section (No. 2724.35) Width Weight* i 4015 Boom head ** (No. 2724.35) Width Weight* Special boom head ** (No. 2724.35) Width 2940 mm *) Including pendant ropes, without auxiliary equipment **) Steel sheaves

カタログの4ページ目を開く

Counterweight Width Weight Counterweight Width Weight 300 t hook block - 4 sheaves Width Weight 150 t hook block - 1 sheave Width Weight 50 t single hook Width Weight Boom section with hydraulics 3140 Boom section with hydraulics Width Weight* Pedestal Pedestal Width Weight

カタログの5ページ目を開く

Winch diagram without Pactronic® Hoisting speed [m/min] 2-winch operation 1-winch operation Winch diagram with Pactronic® 1100 1000 900 i—i 800 Hoisting speed [m/min] Powerful, energy-efficient hybrid drive The new HS 8300 HD is fitted with the Pactronic® system developed by Liebherr. This innovative hybrid drive based on hydraulics offers both economic and ecological advantages. Storing and subsequent regenerating of surplus power allows to increase turnover and to significantly lower fuel consumption. The proven technology of the hydraulic accumulator ensures low maintenance...

カタログの6ページ目を開く

fllH Main winches Power rating according to ISO 9249, 750 kW (1005 hp) at 1700 rpm Engine type - Liebherr D 9512 A7-00 Fuel tank- 1170 l capacity with continuous level - indicator and reserve warning AdBlue tank- 230 l capacity with continuous level - indicator and reserve warning Power rating according to ISO 9249, 750 kW (1005 hp) at 1700 rpm Modell - Liebherr D 9512 A7-04 Fuel tank- 1170 l capacity with continuous level - indicator and reserve warning AdBlue tank- 230 l capacity with continuous level - indicator and reserve warning Engine complies with NRMM exhaust certification...

カタログの7ページ目を開く

Orange peel grab Winch options Clamshell Winch options Maximum capacity in duty cycle operation with standard ropes 1) Lifting a load exceeding the line pull of one winch is only allowed if it can be ensured that each individual winch is not overloaded. When working with a mechanical 2-rope grab the total load to be lifted is limited by the line pull of one winch. Rigging and ropes are part of the load. Max. capacities in metric tonnes do not exceed 66.7% of tipping load. Capacities in duty cycle operation are for reference only and are not programmed in the LMI system. All loads and...

カタログの8ページ目を開く

Load chart for rock handling Main boom No. 2724.35 with 78.7 t counterweight Load chart for clamshell Main boom No. 2724.35 with 78.7 t counterweight Capacities in metric tonnes for boom lengths (20 m - 68 m) with 500 kN winches and 78.7 t counterweight Boom length in (m) Radius (m) 6.7 7 8 9 10 12 14 16 18 20 22 24 28 30 34 36 38 42 44 48 50 55 Max. lifting capacity with mechanical grab is 50 metric tonnes. For higher lifting capacities a hydraulic grab with multi-reeving is required. Above load chart is for reference only. For actual lift duty please refer to load chart in operator’s cab...

カタログの9ページ目を開く

Digging diagram C = Radius / dumping radius D = Max. digging radius = approx. C + 1/3 to 1/2 J E = Digging depth = approx. 40 - 50 % of C J = Height to centre rope pulley boom head Dragline bucket Winch options 2 x 500 kN Capacities in metric tonnes for boom lengths (26 m - 50 m) with 500 kN winches and 78.7 t counterweight Boom length in (m) Max. capacities in metric tonnes do not exceed 75% of tipping load. Capacities in duty cycle operation are for reference only and are not programmed in the lMi system. The size of the bucket has to be determined according to local conditions.

カタログの10ページ目を開く

Digging diagram C = Radius / dumping radius D = Max. digging radius = approx. C + 1/3 to 1/2 J E = Digging depth = approx. 40 - 50 % of C J = Height to centre rope pulley boom head Dragline bucket Winch options 2 x 500 kN Capacities in metric tonnes for boom lengths (26 m - 50 m) with 500 kN winches and 78.7 t counterweight Max. capacities in metric tons do not exceed 75% of tipping load. Capacities in duty cycle operation are for reference only and are not programmed in the LMI system. The size of the bucket has to be determined according to local conditions.

カタログの11ページ目を開く

Working range - main boom 84° – 15° Main boom No. 2724.35 with 78.7 t counterweight ft The maximum capacity of the auxiliary jib is 50 t. The corresponding load chart is programmed in the LMI system. Main boom from 20 m to 68 m (table 1 - No. 2724.35) Length Boom foot Boom section Boom section Conﬁguration for boom lengths 1 Boom section Boom length (m) Auxiliary jib applicable Boom head

カタログの12ページ目を開く

Capacities in metric tonnes for boom lengths (20 m - 68 m) with 500 kN winches and 78.7 t counterweight Above load chart is for reference only. For actual lift duty please refer to load chart in operator’s cab or manual. *) Only possible with special heavy duty boom head.

カタログの13ページ目を開く