CATALOGUE EN
1 / 16ページ

French artisanal manufacturing https://aluminium-boat.com https://la-maltiere.us 5 Rue du Lavoir 53120 Levaré France

Raised flat nose Weight : 68.3438 Capacity : 2 people Load (livre) : 97.6241 Engine : 3 hp

Raised flat nose Length : 9.84252 ft Width : 4.002625 Height : 1.345144 Load : 485.017 (livre) Weight : 92.59415 Capacity : 3 people Engine : 5 hp

Raised flat nose * Non-contractual photo Length : 11.97507 (ft) Width : 4.002625 Height : 1.345144 Capacity : 4 people Weight : 108.0265 Load (livre) : 595.2481 P.S: model 3600 identical in shape to model 3000 but with offset rear trunk

Raised flat nose Length : 11.97507 (ft) Width : 4.92126 Height : 1.345144 Capacity : 4 people Weight : 114.6404 Load (livre) : 639.3406 Engine : 9.9 hp

Raised flat nose Length (ft) : 13.12336 Width : 4.002625 Height : 1.410761 Capacity : 5 people Weight : 116.845 Load (livre) : 661.3868 Engine : 9.9 hp As standard, three seats and two rowing positions

Raised flat nose * Non-contractual photo Length (ft) : 13.12 Width : 4.99 Height : 1.57 Capacity : 5 people Weight : 143.3 Load (livre) : 837.76

Raised flat nose * Non-contractual photo Length (ft) : 16.4042 Width : 4.986877 Height : 1.574803 Weight : 191.8022 Capacity : 7 people Load (livre) : 1047.196 Engine : 15 hp Price : 5,549 euros

* Non-contractual photo Pointy nose Weight : 92.59415 Capacity : 3 people Load (livre) : 485.017 Engine: 5 hp Length (ft) : 9.350394 Width : 4.002625 Height : 1.345144

* Non-contractual photo Pointy nose Length (ft) : 12.63123 Width : 4.002625 Height : 1.410761 Capacity : 5 people Load (livre) : 661.3868 Weight : 116.845 Engine : 9.9 hp Price: 2,549 euros

Serial equipment Each boat is a flat-bottomed hull, welded from aluminum. The high strength joints are siliconed for finishing. The manufacturing is done entirely by us. Each aluminum boat bottom is made with a 2 millimeter thick aluminum sheet with several angles and protective reinforcements. The side panels are made of 1.5mm thick aluminum with ribs. The transom provides reinforcement for the engine. The central box serves as a buoyancy reserve. On request, the model 2700 boat may not be equipped with a drain plug. On all our boats the load is given as an indication for a draft of 10 cm....

Apart from the general form, all changes can be made at your convenience. Hook holder 90 e Optional equipment Rod support Name your boat Retractable wheels Front and/or rear guardrail Front trunk Various chests, for rods, livewells, etc. Specific achievements... Our options are not exhaustive. For prices, contact us.

Optional equipment -Fish tank -Pairs of wooden oars extra CONSOLE ALUMINIUM Aluminum structure (grey) 400 e Steering wheel steering hub and cable steering (black) 350 e With control box (bleu) 200 e Two control cables, depending on engine brand (red and orange) 70 e .Non-slip rubber mat Price/m2 per 1.40 m width .Navy blue awning Fully assembled with cover and discount structure

The options are made to order, like our boats. Optional equipment We establish quotes in pdf, based on your plans and your requests. .Seat with padded backrest or other comfort seats Consult prices and models on the Amiaud Pêche website .Tsunami bilge pump .Tulip shovel grapple 4 kg .Navy blue fender .3 strand rope diameter 10 - Price per meter .Galva chain -Price per meter Our boats must be paid for before leaving the factory. VAT NOT APPLICABLE ARTICLE 293 B OF THE CGI ON SAS LA MALTIERE.

The trailers that we offer are made in France, in Mayenne. This is the PAM ROCCA NAUTILUS AIN GOLIATH range. Special Barque La Maltière Road model N271AP La Maltière N271AP special Bateaux La Maltière/Alu Speed Boat of 5 METERS. Tilting model N331A La Maltière Trailer options .Spare wheel support .Spare wheel La Maltière offers you its delivery service. The price varies depending on the model but also the presence or absence of a trailer and especially the place of delivery of the boat. For a price, contact