cJoy OT
1 / 2ページ

カタログの抜粋

Compact Joystick Operator Terminal The cJoy Operator Terminal serves as the main operator interface for the cJoy Compact Joystick system. It can also be used as an additional joystick terminal for the cPos and SDP range of DP The terminal provides an intuitive and user-friendly tool for joystick, station keeping and autopilot operation. • 3-axis joystick to control surge, sway and yaw thruster demand • Heading wheel for heading demand input • 6.5" high-resolution colour display • Display page manoeuvring buttons • Operational mode buttons with indicator lights and double-push action • Quick access buttons for system functions • Functions for command request/transfer between operator locations • Selection of joystick/automatic axis control • Selection of joy stick thrust • Selection of rotation centre • Selection of wind compensation in joystick mode • Change heading and position selection • Joystick calibration function • Dedicated alarm page • Alarm indicator/buzzer with silence button • Power indicator with power failure alarm. • Panel and display illumination adjustment • Automatic detection of panel location and orientation • Panel test function. • Joystick calibration function The cJoy Operator Terminal provides the operator with all necessary facilities to control a vessel in joystick and autopilot mode as well as for station The operator panel is ergonomically designed so that the operator can easily make the necessary adjustments and give control commands. The computer and all electronics are housed in a self- contained desk/console mountable unit. The terminal communicates with the cJoy Controller and other cJoy Operator Terminals via LAN. Up to six cJoy Wing Terminals can be connected to one cJoy Operator Terminal. The connection between the terminal and the controller is established via a junction box. The junction box connector is coded to enable the terminal to automatically adjust display views and joystick axes according to the orientation of the operator position. Kongsberg Maritime reserves the right to make changes to the material or product described, at any time without notice.

カタログの1ページ目を開く

Technical Specifications Standards Applied The equipment is designed to conform to the following • EN 50081-2 Electromagnetic compatibility - Generic emission standard, Part 2: Industrial environment • EN 50082-2 Electromagnetic compatibility - Generic immunity standard, Part 2: Industrial environment • EN 60204 Safety of machinery - Electrical equipment of machines, Part 1 : General requirements • EN 60945 Marine navigation and radio communication equipment and systems - General requirements: Methods of testing and required tests • IACS E10 Unified environmental test specification for...

カタログの2ページ目を開く