Automatic DP alert
1 / 2ページ

カタログの抜粋

AUTOMATIC CONTROL OF THE DYNAMIC POSITIONING ALERT SYSTEM The DP Alert System is used during diving, drilling, pipelaying or other critical operations to give a general alert of any degradation of the DP system or the vessel’s ability to continue the operation. The DP Alert System can be operated in Automatic DP alert mode where alert levels are escalated automatically in response to signals from the DP Control System. The operator can also manually escalate the alert level from the DP Alert Control Panel, but only decrease it to the level requested by the DP Control System. To further decrease the alert level, automatic mode must be disabled. The DP Control System monitors a set of parameters that have limits set up as criteria for DP alert. If a limit is exceeded, the DP Controller sends a request to the DP Alert System to change alert level. DP Alert status levels DP Alert Control Panel Status levels: green, blue or white, yellow, red. The DP Alert System can be run manually by the DP operator using the DP Alert Control Panel. Normal operational status. Advisory (optional) - A condition exists that must be considered by relevant personnel. Degraded - Safe working limits exceeded heading or position may be at risk. Emergency - Loss of position may be inevitable, a “red condition” exists or any other emergency situation that warrants immediate action. The DP operator can escalate or de-escalate the alert status when required. However, in Automatic DP alert mode there are limitations related to decreasing of the alert lev

カタログの1ページ目を開く

Automatic DP alert mode Automatic operation of the DP Alert System is enabled in the DP alert settings dialog box. This is accessed either from the DP alert view or via the menu settings. The DP alert settings dialog box is also where the alert criteria are set and enabled. The thresholds are set by the DP operator in accordance with operational guidelines. The dialog box contains protection / validation to prevent the user from accidentally causing a change of DP alert level. DP alert criteria list The DP alert settings dialog box shows a list of DP alert criteria that are to be monitored...

カタログの2ページ目を開く